____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 741 |
Bobcat 741 Specifications
The
Bobcat 741 skid steer loader is powered by 101 cu.in (1.65L) Deutz F2L511
four-cycle two-cylinder air-cooled diesel engine with a rated power of 29.7 hp
(22.1 kW) at 2800 rpm. The Bobcat 741 is equipped with a radial-lift loader
boom, single-speed hydrostatic transmission, 80HS drive chains, and 7.00x15
standard tires. The hydraulic system has a pump with fluid flow rate of 11 gpm
(41.6 lpm). The hydraulic pressure is 2400 psi (165 bar). The skid steer loader
has a rated operating capacity of 1300 lbs (590 kg) and tipping load of 2600 lbs
(1180 kg). The lift height is 109 inches (2770 mm) to hinge pin, and dump height
is 86.3 inches (2190 mm).
| Engine Specs |
Engine Model ...................... Deutz F2L511
Engine Type ...................... 4-cycle 2-cylinder liquid-cooled diesel
Number of Cylinders ...................... Two
Displacement, cu.in (L) ...................... 101 (1.65)
Cylinder Bore, in (mm) ...................... 3.94 (100.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 29.7 (22.1)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 88 (64.9)
Torque Speed, rpm ...................... 2000
Firing Order ...................... 2-1
Fuel System ...................... Injection pump
Fuel Injection Pump ...................... Bosch
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dry replaceable cartridge
Cooling System ...................... Air-cooled
Valve Clearance (Inlet), in (mm) ...................... 0.006 (0.15)
Valve Clearance (Exhaust), in (mm) ...................... 0.006 (0.15)
Fuel Tank Capacity, gal (L) ...................... 13.0 (49.0)
Oil Capacity, qts (L) ...................... 4.0 (3.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80HS roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Chaincase Capacity, qts (L) ...................... 32.0 (30.3)
Maximum Speed, mph (km/h) ...................... 6.0 (9.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 11.0 (41.6)
System Pressure, Bar (psi) ...................... 165 (2400)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.5 (13.2)
Hydraulic System Capacity, gal (L) ...................... 6.0 (22.7)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1300 (590)
Tipping Load, lbs (kg) ...................... 2600 (1180)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35.4 (900)
Height (Operator Cab), in (mm) ...................... 75.8 (1925)
Height (Boom Raised), in (mm) ...................... 139.6 (3545)
Length (w/o Bucket), in (mm) ...................... 94.5 (2425)
Length (Bucket On Ground), in (mm) ...................... 120.4 (3060)
Width (w/o Bucket), in (mm) ...................... 47 (1195)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 86.3 (2190)
Dump Reach At Max Height, in (mm) ...................... 21.8 (555)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 100
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.7 (1770)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.2 (1125)
Turning Radius (Rear), in (mm) ...................... 58.5 (1485)
Operating Weight, lbs (kg) ...................... 4730 (2145)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |