____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 730 |
Bobcat 730 Specifications
The
Clark Bobcat 730 skid steer loader is powered by 107.7 cu.in (1.8L) Wisconsin
VF4D four-stroke four-cylinder air-cooled gasoline engine with a rated power of 28 hp (20.9
kW) at 2500 rpm. The Clark Bobcat 730 is equipped with a radial-lift loader
boom, single-speed hydrostatic transmission, 80H drive chains, and 7.00x15
tires. The hydraulic system has a pump with fluid flow rate of 11 gpm (42 lpm).
The hydraulic pressure is 2500 psi (172 bar). The skid steer loader has a rated
operating capacity of 1300 lbs (590 kg) and tipping load of 2650 lbs (1200 kg).
The lift height is 109 inches (2770 mm) to hinge pin, and dump height is 88.4
inches (2245 mm).
| Engine Specs |
Engine Model ...................... Wisconsin VF4D
Engine Type ...................... 4-cycle 4-cylinder gasoline/LPG engine
Number of Cylinders ...................... Four
Total Displacement, cu.in (L) ...................... 107.7 (1.77)
Cylinder Bore, in (mm) ...................... 3.25 (82.6)
Piston Stroke, in (mm) ...................... 3.25 (82.6)
Rated Engine Power, hp (kW) ...................... 28.0 (20.9)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 89.8 (66.2)
Torque Speed, rpm ...................... 1800
Firing Order ...................... 1-3-4-2
Fuel System ...................... Carburetor
Lubricating System ...................... Oil spray
Oil Filter Type ...................... Full flow replaceable element
Air Cleaner Type ...................... Dry replaceable cartridge
Cooling System ...................... Air-cooled
Ignition System ...................... Distributor
Spark Plug Gap, in (mm) ...................... 0.018-0.022 (0.46-0.56)
Breaker Point Gap, in (mm) ...................... 0.03 (0.76)
Fuel Tank Capacity, gal (L) ...................... 9.0 (34.0)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 22
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Forward Speed, mph (km/h) ...................... 6.0 (9.7)
Reverse Speed, mph (km/h) ...................... 6.0 (9.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 11.0 (42.0)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic System Capacity, gal (L) ...................... 11.3 (43.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1300 (590)
Tipping Load, lbs (kg) ...................... 2650 (1200)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35.4 (900)
Height (Operator Cab), in (mm) ...................... 75.6 (1920)
Height (Boom Raised), in (mm) ...................... 139.6 (3545)
Length (w/o Bucket), in (mm) ...................... 95.4 (2425)
Length (Bucket On Ground), in (mm) ...................... 120.4 (3060)
Width (w/o Bucket), in (mm) ...................... 45.6 (1160)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 31
Dump Height (Fully Raised), in (mm) ...................... 88.4 (2245)
Dump Reach At Max Height, in (mm) ...................... 24 (610)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 93
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.7 (1770)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.2 (1125)
Turning Radius (Rear), in (mm) ...................... 58.5 (1485)
Operating Weight, lbs (kg) ...................... 4200 (1910)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |