____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland LX485 |
New Holland LX485 Specifications
The
New Holland LX485 skid steer loader driveline system components: Shibaura N843H
vertical 3-cylinder liquid-cooled diesel engine with a rated power of 36 hp
(26.5 kW), and one-speed hydrostatic transmission. The hydraulic system has a
pump with a rated capacity of 11.7 gal/min (44.3 l/min). The system relief
pressure is 2600 psi (176 bar). The New Holland LX485 is equipped with a
radial-lift boom, ASA 80 drive chains, and 10.00x16.5 or 27x8.50x15
tires. The skid steer loader has a max lift height of 111" (2825 mm) to
hinge pin and dump height of 87.9" (2230 mm). The rated operating capacity is
1350 lbs (612 kg), and tipping load is 2700 lbs (1225 kg).
| Engine Specs |
Engine Model ...................... Shibaura N843H
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 3
Total Displacement, cu.in (L) ...................... 91.3 (1.49)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Rated Engine Power, hp (kW) ...................... 36.0 (26.5)
Rated Engine Speed, rpm ...................... 3200
Maximum Torque, Nm (lb-ft) ...................... 99 (73)
Torque Speed, rpm ...................... 1900
Idling Speed, rpm ...................... 950-3450
Aspiration Type ...................... Naturally aspirated
Compression Ratio ...................... 22:1
Firing Order ...................... 1-2-3
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 10.0 (37.9)
Engine Oil Capacity, qts (L) ...................... 5.0 (4.7)
Coolant Capacity, qts (L) ...................... 9.8 (9.2)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 27x8.50x15
Rear Tire Size (Opt) ...................... 27x8.50x15
Chaincase Capacity, qts (L) ...................... 6.0 (5.7)
Maximum Speed, mph (km/h) ...................... 6.6 (10.6)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 11.7 (44.3)
System Pressure, Bar (psi) ...................... 176 (2600)
Hydraulic System Capacity, gal (L) ...................... 5.0 (18.9)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1350 (612)
Tipping Load, lbs (kg) ...................... 2700 (1225)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37.4 (950)
Height (Operator Cab), in (mm) ...................... 72.8 (1850)
Height (Boom Raised), in (mm) ...................... 136 (3460)
Length (w/o Bucket), in (mm) ...................... 96.3 (2445)
Length (Bucket On Ground), in (mm) ...................... 120 (3040)
Width (w/o Bucket), in (mm) ...................... 47.8 (1215)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 111 (2825)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 87.9 (2230)
Dump Reach At Max Height, in (mm) ...................... 20.5 (520)
Rollback Angle At Ground Level, deg ...................... 36
Rollback Angle At Max Height, deg ...................... 83
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 60 (1520)
Ground Clearance, in (mm) ...................... 7.8 (200)
Turning Radius (Front), in (mm) ...................... 71 (1775)
Turning Radius (Rear), in (mm) ...................... 56 (1400)
Shipping weight, lbs (kg) ...................... 4070 (1850)
Operating Weight, lbs (kg) ...................... 4360 (1980)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |