____________________________________________________________________________________
Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland LX465 |
New Holland LX465 Specifications
The New Holland LX465 skid steer loader is powered by 91.3 cu.in (1.5L) Shibaura N843 3-cylinder indirect injection water-cooled diesel engine with a rated power of 30 hp (22.2 kW) at 2900 rpm. The New Holland LX465 is equipped with a radial-lift loader boom, single-speed hydrostatic transmission, ASA 80 drive chains, and 10x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 10.6 gpm (40.1 lpm). The hydraulic pressure is 2600 psi (176 bar). The skid steer loader has a rated operating capacity of 1250 lbs (570 kg) and tipping load of 2500 lbs (1140 kg). The lift height is 111" (2825 mm) to hinge pin, and dump height is 87.9" (2230 mm).
Engine Specs |
Engine Model ...................... Shibaura N843
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 3
Total Displacement, cu.in (L) ...................... 91.3 (1.49)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Rated Engine Power, hp (kW) ...................... 30.0 (22.2)
Rated Engine Speed, rpm ...................... 2900
Maximum Torque, Nm (lb-ft) ...................... 94 (69.5)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 950-3150
Aspiration Type ...................... Naturally aspirated
Compression Ratio ...................... 22:1
Firing Order ...................... 1-2-3
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 10.0 (37.9)
Engine Oil Capacity, qts (L) ...................... 5.0 (4.7)
Coolant Capacity, qts (L) ...................... 9.8 (9.2)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 27x8.50x15
Rear Tire Size (Opt) ...................... 27x8.50x15
Chaincase Capacity, qts (L) ...................... 6.0 (5.7)
Maximum Speed, mph (km/h) ...................... 6.6 (10.6)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 10.6 (40.1)
System Pressure, Bar (psi) ...................... 176 (2600)
Hydraulic System Capacity, gal (L) ...................... 5.0 (18.9)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1250 (570)
Tipping Load, lbs (kg) ...................... 2500 (1140)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37.4 (950)
Height (Operator Cab), in (mm) ...................... 72.8 (1850)
Height (Boom Raised), in (mm) ...................... 136 (3460)
Length (w/o Bucket), in (mm) ...................... 96.3 (2445)
Length (Bucket On Ground), in (mm) ...................... 120 (3040)
Width (w/o Bucket), in (mm) ...................... 47.8 (1215)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 111 (2825)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 87.9 (2230)
Dump Reach At Max Height, in (mm) ...................... 20.5 (520)
Rollback Angle At Ground Level, deg ...................... 36
Rollback Angle At Max Height, deg ...................... 83
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 60 (1520)
Ground Clearance, in (mm) ...................... 7.8 (200)
Turning Radius (Front), in (mm) ...................... 71 (1775)
Turning Radius (Rear), in (mm) ...................... 56 (1400)
Shipping weight, lbs (kg) ...................... 4070 (1850)
Operating Weight, lbs (kg) ...................... 4360 (1980)
____________________________________________________________________________________
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |