____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland LS185B |
New Holland LS185B Specifications
The
New Holland LS185B skid steer loader is powered by 205 cu.in (3.4L) New Holland
334TM2 3-cylinder turbocharged liquid-cooled diesel engine with a rated power of
72 hp (54 kW) at 2300 rpm. The New Holland LS185B is equipped with a radial-lift
loader boom, one-speed or two-speed hydrostatic transmission, 100 HV drive
chains, and 12x16.5 standard tires. The hydraulic system has a pump with fluid
flow rate of 19.3 gpm (73.1 lpm) or 34.7 gpm (131.5 lpm). The skid steer loader
has a rated operating capacity of 2500 lbs (1134 kg) and tipping load of 5000
lbs (2270 kg). The lift height is 124.6 inches (3165 mm) to hinge pin, and dump
height is 100 inches (2540 mm).
| Engine Specs |
Engine Model ...................... New Holland 334TM2
Engine Type ...................... 4-cycle vertical in-line liquid-cooled diesel
Number of Cylinders ...................... 3
Total Displacement, cu.in (L) ...................... 205 (3.4)
Cylinder Bore, in (mm) ...................... 4.09 (104.0)
Piston Stroke, in (mm) ...................... 5.20 (132.0)
Rated Engine Power, hp (kW) ...................... 72.0 (54.0)
Rated Engine Speed, rpm ...................... 2300
Maximum Torque, Nm (lb-ft) ...................... 319 (228)
Torque Speed, rpm ...................... 1400
Idling Speed, rpm ...................... 1000-2550
Aspiration Type ...................... Turbocharged
Firing Order ...................... 1-2-3
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced lubrication
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 18.0 (68.2)
Engine Oil Capacity, qts (L) ...................... 8.4 (8.0)
Coolant Capacity, qts (L) ...................... 17.9 (17.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 100 HV roller chain
Front Tire Size ...................... 12.00x16.5
Rear Tire Size ...................... 12.00x16.5
Chaincase Capacity, qts (L) ...................... 10.7 (10.2)
Maximum Speed (Single), mph (km/h) ...................... 6.9 (11.1)
Maximum Speed (Two), mph (km/h) ...................... 11.3 (18.1)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 19.3 (73.1)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 34.7 (131.5)
System Pressure, Bar (psi) ...................... 176 (2600)
Hydraulic Tank Capacity, gal (L) ...................... 5.0 (18.9)
Hydraulic System Capacity, gal (L) ...................... 15.0 (56.8)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2500 (1134)
Tipping Load, lbs (kg) ...................... 5000 (2270)
Breakout Force (Lift), lbs (kg) ...................... 4195 (1900)
Breakout Force (Tilt), lbs (kg) ...................... 6035 (2735)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 48 (1220)
Height (Operator Cab), in (mm) ...................... 77 (1955)
Height (Boom Raised), in (mm) ...................... 151 (3835)
Length (w/o Bucket), in (mm) ...................... 110 (2795)
Length (Bucket On Ground), in (mm) ...................... 139 (3530)
Width (w/o Bucket), in (mm) ...................... 58.5 (1485)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 124.6 (3165)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 100 (2540)
Dump Reach At Max Height, in (mm) ...................... 32.5 (825)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 7.9 (200)
Turning Radius (Front), in (mm) ...................... 81 (2055)
Turning Radius (Rear), in (mm) ...................... 70 (1780)
Operating Weight, lbs (kg) ...................... 7100 (3220)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |