Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland LS160

New Holland LS160 Specifications

The New Holland LS160 skid steer loader driveline system components: a 121.7 cu.in (2L) Shibaura N844 vertical 4-cylinder indirect injection liquid-cooled diesel engine with a rated power of 46 hp (34 kW), and single-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 15.5 gal/min (58.7 l/min). The system relief pressure is 2600 psi (177 bar). The New Holland LS160 is equipped with 80 HD roller chains and 10x16.5 tires. The skid steer loader has a boom lifting force of 2825 lbs (1285 kg) and bucket breakout force of 3712 lbs (1685 kg). The rated operating capacity is 1700 lbs (770 kg), and tipping load is 3400 lbs (1540 kg).

Engine Specs

Engine Model ...................... Shibaura N844
Engine Type ...................... 4-cycle vertical liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 121.7 (1.995)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 46.0 (34.0)
Rated Engine Speed, rpm ...................... 2900
Maximum Torque, Nm (lb-ft) ...................... 137 (101)
Torque Speed, rpm ...................... 1700
Fast Idle Speed, rpm ...................... 3130-3180
Low Idle Speed, rpm ...................... 900-1000
Compression Ratio ...................... 23:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Valve Clearance, in (mm) ...................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) ...................... 14.4 (54.5)
Oil Capacity, qts (L) ...................... 8.8 (8.3)
Coolant Capacity, qts (L) ...................... 10.8 (10.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40

Drive Train

Drive System Type ...................... Hydrostatic, chain drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 10x16.5 HD
Tire Size (Opt) ...................... 31x15.5-12
Chaincase Capacity, qts (L) ...................... 13.1 (12.3)
Forward Speed, mph (kph) ...................... 7.3 (11.7)
Reverse Speed, mph (kph) ...................... 7.3 (11.7)

Hydraulic System

Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow, gpm (Lpm) ......................15.5 (58.7)
System Pressure, Bar (psi) ...................... 170-177 (2500-2600)
Hydraulic Reservoir Capacity, qts (L) ...................... 15.7 (14.8)
Hydraulic System Capacity, gal (L) ...................... 8.6 (32.6)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1700 (770)
Tipping Load, lbs (kg) ...................... 3400 (1540)
Boom Lifting Force, lbs (kg) ...................... 2825 (1285)
Bucket Breakout Force, lbs (kg) ...................... 3712 (1685)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 42.5 (1080)
Height (Boom Raised), in (mm) ...................... 140 (3555)
Height (Operator Cab), in (mm) ...................... 74.7 (1900)
Length (w/o Bucket), in (mm) ...................... 101.5 (2575)
Length (Bucket On Ground), in (mm) ...................... 126.8 (3220)
Width (w/o Bucket), in (mm) ...................... 65.6 (1665)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115.5 (2935)
Dump Angle At Max Height, deg ...................... 46
Dump Height (Fully Raised), in (mm) ...................... 90.4 (2295)
Dump Reach At Max Height, in (mm) ...................... 29 (740)
Rollback Angle At Ground Level, deg ...................... 36
Rollback Angle At Max Height, deg ...................... 83
Departure Angle, deg ...................... 23
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 7.7 (195)
Turning Radius (w/Bucket), in (mm) ...................... 74 (1890)
Shipping Weight, lbs (kg) ...................... 4885 (2220)
Operating Weight, lbs (kg) ...................... 5530 (2510)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS