Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L865 |
New Holland L865 Specifications
The New Holland L865 skid steer loader driveline system components: New Holland 332T three-cylinder direct injection turbocharged diesel engine with a rated power of 60 hp (44.5 kW), and single-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 17.6 gal/min (66.7 l/min) or 31 gal/min (117.5 l/min). The system pressure is 2600 psi (176 bar). The New Holland L865 is equipped with a radial-lift boom, ASA 100 drive chains, and 12x16.5 tires. The skid steer has a max lift height of 125.4" (3185 mm) to hinge pin and dump height of 100.5" (2555 mm). The rated operating capacity is 2200 lbs (998 kg), and tipping load is 4400 lbs (2000 kg).
Engine Specs |
Engine Model ...................... New Holland 332T
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 3
Total Displacement, cu.in (L) ...................... 192 (3.15)
Cylinder Bore, in (mm) ...................... 4.4 (112.0)
Piston Stroke, in (mm) ...................... 4.2 (106.7)
Rated Engine Power, hp (kW) ...................... 60.0 (44.5)
Rated Engine Speed, rpm ...................... 2100
Maximum Torque, Nm (lb-ft) ...................... 250 (185)
Torque Speed, rpm ...................... 1400
Idling Speed, rpm ...................... 1000-2275
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 17.5:1
Firing Order ...................... 1-2-3
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced lubrication
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 18.8 (71.2)
Engine Oil Capacity, qts (L) ...................... 7.0 (6.6)
Coolant Capacity, qts (L) ...................... 16.0 (15.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 45
Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... ASA 100 roller chain
Front Tire Size (Std) ...................... 12.00x16.5
Rear Tire Size (Std) ...................... 12.00x16.5
Front Tire Size (Opt) ...................... 8.25x15
Rear Tire Size (Opt) ...................... 8.25x15
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 7.6 (12.2)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 17.6 (66.7)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 31.0 (117.5)
System Pressure, Bar (psi) ...................... 176 (2600)
Hydraulic System Capacity, gal (L) ...................... 6.5 (25.5)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2200 (998)
Tipping Load, lbs (kg) ...................... 4400 (2000)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 48 (1220)
Height (Operator Cab), in (mm) ...................... 78 (1980)
Height (Boom Raised), in (mm) ...................... 150 (3810)
Length (w/o Bucket), in (mm) ...................... 115.3 (2925)
Length (Bucket On Ground), in (mm) ...................... 140.1 (3560)
Width (w/o Bucket), in (mm) ...................... 58.5 (1485)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 125.4 (3185)
Dump Angle At Max Height, deg ...................... 47
Dump Height (Fully Raised), in (mm) ...................... 100.5 (2555)
Dump Reach At Max Height, in (mm) ...................... 31.3 (795)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 74
Departure Angle, deg ...................... 24
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (Front), in (mm) ...................... 82.8 (2100)
Turning Radius (Rear), in (mm) ...................... 69.3 (1760)
Operating Weight, lbs (kg) ...................... 6955 (3155)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |