____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L785 |
New Holland L785 Specifications
The
New Holland L785 skid steer loader is powered by 204 cu.in (3.3L) Perkins 4.2032
4-cylinder liquid-cooled diesel engine with a rated power of 57
hp (42.5 kW) at 2300 rpm. The New Holland L785 is equipped with a radial-lift
boom, one-speed or two-speed hydrostatic transmission, ASA 80 drive chains, and
12x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of
16 gpm (60.6 lpm). The hydraulic pressure is 2600 psi (176 bar). The skid steer loader
has a rated operating capacity of 2050 lbs (930 kg) and tipping load of 4100 lbs
(1860 kg). The lift height is 121.5 inches (3085 mm) to hinge pin, and dump
height is 99 inches (2515 mm).
| Engine Specs |
Engine Model ...................... Perkins 4.2032
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 204 (3.34)
Cylinder Bore, in (mm) ...................... 3.6 (91.4)
Piston Stroke, in (mm) ...................... 5.0 (127.0)
Rated Engine Power, hp (kW) ...................... 57.0 (42.5)
Rated Engine Speed, rpm ...................... 2300
Idling Speed, rpm ...................... 950-2485
Aspiration Type ...................... Naturally aspirated
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced lubrication
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Valve Clearance (Intake), in (mm) ...................... 0.008 (0.20)
Valve Clearance (Exhaust), in (mm) ...................... 0.012 (0.30)
Fuel Tank Capacity, gal (L) ...................... 20.0 (75.8)
Engine Oil Capacity, qts (L) ...................... 6.0 (5.7)
Coolant Capacity, qts (L) ...................... 16.0 (15.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 37
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size (Std) ...................... 12.00x16.5
Rear Tire Size (Std) ...................... 12.00x16.5
Front Tire Size (Opt) ...................... 7.50x16
Rear Tire Size (Opt) ...................... 7.50x16
Maximum Speed (Single), mph (km/h) ...................... 7.0 (11.2)
Maximum Speed (Two), mph (km/h) ...................... 12.0 (19.2)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 16.0 (60.6)
System Pressure, Bar (psi) ...................... 159 (2300)
Hydraulic System Capacity, gal (L) ...................... 22.0 (83.3)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2050 (930)
Tipping Load, lbs (kg) ...................... 4100 (1860)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 48 (1220)
Height (Operator Cab), in (mm) ...................... 76.5 (1945)
Height (Boom Raised), in (mm) ...................... 145.3 (3690)
Length (w/o Bucket), in (mm) ...................... 119.8 (3040)
Length (Bucket On Ground), in (mm) ...................... 144.3 (3665)
Width (w/o Bucket), in (mm) ...................... 57 (1445)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 121.5 (3085)
Dump Angle At Max Height, deg ...................... 46
Dump Height (Fully Raised), in (mm) ...................... 99 (2515)
Dump Reach At Max Height, in (mm) ...................... 34 (865)
Rollback Angle At Ground Level, deg ...................... 36
Rollback Angle At Max Height, deg ...................... 74
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 70 (1780)
Ground Clearance, in (mm) ...................... 6.8 (170)
Turning Radius (Front), in (mm) ...................... 81.5 (2070)
Turning Radius (Rear), in (mm) ...................... 73 (1855)
Operating Weight, lbs (kg) ...................... 5830 (2645)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |