____________________________________________________________________________________

Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L328

New Holland L328 Specifications

The New Holland L328 skid steer loader driveline system components: a 207 cu.in (3.4L) FPT F5H FL463A 4-cylinder turbocharged diesel engine with a rated power of 68 hp (51 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 24.2 gal/min (91.5 l/min) or 37.6 gal/min (142.5 l/min). The New Holland L328 is equipped with a vertical-lift boom, ASA 100 drive chains, and 12x16.5 standard tires. The skid steer has a maximum lift height of 129.4" (3285 mm) to hinge pin and dump height of 103.1" (2620 mm). The rated operating capacity is 2800 lbs (1270 kg), and tipping load is 5600 lbs (2540 kg).

Engine Specs

Engine Model ...................... FPT F5H FL463A
Engine Type ...................... 4-cycle vertical in-line liquid-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 207 (3.4)
Cylinder Bore, in (mm) ...................... 3.90 (99.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Rated Engine Power, hp (kW) ...................... 68.0 (51.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 314 (232)
Torque Speed, rpm ...................... 1400
Idling Speed, rpm ...................... 1100-2600
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced lubrication
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled
Fuel Tank Capacity, gal (L) ...................... 25.5 (96.5)
Engine Oil Capacity, qts (L) ...................... 8.9 (8.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95

Drive Train

Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... ASA 100 roller chain
Front Tire Size ...................... 12.00x16.5
Rear Tire Size ...................... 12.00x16.5
Chaincase Capacity, qts (L) ...................... 23.3 (22.2)
Maximum Speed (Single), mph (km/h) ...................... 7.0 (11.3)
Maximum Speed (Two), mph (km/h) ...................... 10.5 (16.9)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 24.2 (91.5)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 37.6 (142.5)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic System Capacity, gal (L) ...................... 12.0 (45.4)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2800 (1270)
Tipping Load, lbs (kg) ...................... 5600 (2540)
Breakout force (Lift), lbs (kg) ...................... 6030 (2740)
Breakout force (Tilt), lbs (kg) ...................... 8620 (3920)
Loader Boom Type .................... Vertical-lift (Super Boom)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 52 (1320)
Height (Operator Cab), in (mm) ...................... 78.8 (2000)
Height (Boom Raised), in (mm) ...................... 159.7 (4055)
Length (w/o Bucket), in (mm) ...................... 117.8 (2995)
Length (Bucket On Ground), in (mm) ...................... 142.9 (3630)
Width (w/o Bucket), in (mm) ...................... 56.9 (1450)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 129.4 (3285)
Dump Angle At Max Height, deg ...................... 55
Dump Height (Fully Raised), in (mm) ...................... 103.1 (2620)
Dump Reach At Max Height, in (mm) ...................... 31.9 (810)
Rollback Angle At Ground Level, deg ...................... 34
Rollback Angle At Max Height, deg ...................... 85
Departure Angle, deg ...................... 24
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 84.8 (2155)
Turning Radius (Front w/o Bucket), in (mm) ...................... 56.2 (1430)
Turning Radius (Rear), in (mm) ...................... 71.2 (1810)
Shipping weight, lbs (kg) ...................... 7565 (3430)
Operating Weight, lbs (kg) ...................... 7895 (3580)

____________________________________________________________________________________

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS