Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L320

New Holland L320 Specifications

The New Holland L320 skid steer loader is powered by 133.8 cu.in (2.2L) Shibaura N844LT 4-cylinder turbocharged diesel engine with a rated power of 57 hp (42.4 kW) at 2900 rpm. The New Holland L320 is equipped with a vertical-lift loader boom, one-speed or two-speed hydrostatic transmission, ASA 80 drive chains, and 12x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 19 gpm (72 lpm) or 28.8 gpm (109 lpm). The skid steer loader has a rated operating capacity of 2000 lbs (905 kg) and tipping load of 4000 lbs (1810 kg). The lift height is 121 inches (3075 mm) to hinge pin, and dump height is 94.6 inches (2405 mm).

Engine Specs

Engine Model ...................... ISM Shibaura N844LT-D-ROW
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.8 (2.16)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Rated Engine Power, hp (kW) ...................... 57.0 (42.4)
Rated Engine Speed, rpm ...................... 2900
Maximum Torque, Nm (lb-ft) ...................... 171 (126)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1050-3150
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 22.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 20.0 (75.5)
Engine Oil Capacity, qts (L) ...................... 7.5 (7.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95

Drive Train

Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size ...................... 10.00x16.5
Rear Tire Size ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 7.8 (7.4)
Maximum Speed (Single), mph (km/h) ...................... 7.9 (12.7)
Maximum Speed (Two), mph (km/h) ...................... 11.2 (18.0)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 19.0 (72.0)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 28.8 (109.0)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic Tank Capacity, gal (L) ...................... 10.0 (37.9)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2000 (905)
Tipping Load, lbs (kg) ...................... 4000 (1810)
Breakout force (Lift), lbs (kg) ...................... 3450 (1570)
Breakout force (Tilt), lbs (kg) ...................... 7300 (3320)
Loader Boom Type .................... Vertical-lift (Super Boom)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 44.5 (1130)
Height (Operator Cab), in (mm) ...................... 78.8 (2000)
Height (Boom Raised), in (mm) ...................... 151.4 (3845)
Length (w/o Bucket), in (mm) ...................... 105.7 (2685)
Length (Bucket On Ground), in (mm) ...................... 131.6 (3340)
Width (w/o Bucket), in (mm) ...................... 57 (1450)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 121 (3075)
Dump Angle At Max Height, deg ...................... 52
Dump Height (Fully Raised), in (mm) ...................... 94.6 (2405)
Dump Reach At Max Height, in (mm) ...................... 29.9 (760)
Rollback Angle At Ground Level, deg ...................... 34
Rollback Angle At Max Height, deg ...................... 88
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 81.2 (2060)
Turning Radius (Front w/o Bucket), in (mm) ...................... 52.6 (1340)
Turning Radius (Rear), in (mm) ...................... 63 (1600)
Shipping weight, lbs (kg) ...................... 6170 (2795)
Operating Weight, lbs (kg) ...................... 6470 (2930)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS