____________________________________________________________________________________

Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L318

New Holland L318 Specifications

The New Holland L318 skid steer loader driveline system components: Shibaura N844LT 4-cylinder indirect injection turbocharged diesel engine with a rated power of 57 hp (42.4 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 19 gal/min (72 l/min) or 28.8 gal/min (109 l/min). The New Holland L318 is equipped with a vertical-lift boom, ASA 80 drive chains, and 10x16.5 standard tires. The skid steer loader has a maximum lift height of 120" (3050 mm) to hinge pin and dump height of 93.6" (2380 mm). The rated operating capacity is 1800 lbs (818 kg), and tipping load is 3600 lbs (1640 kg).

Engine Specs

Engine Model ...................... ISM Shibaura N844LT-D-ROW
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.8 (2.16)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Rated Engine Power, hp (kW) ...................... 57.0 (42.4)
Rated Engine Speed, rpm ...................... 2900
Maximum Torque, Nm (lb-ft) ...................... 171 (126)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1050-3150
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 22.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 20.0 (75.5)
Engine Oil Capacity, qts (L) ...................... 7.5 (7.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95

Drive Train

Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size ...................... 10.00x16.5
Rear Tire Size ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 7.8 (7.4)
Maximum Speed (Single), mph (km/h) ...................... 7.9 (12.7)
Maximum Speed (Two), mph (km/h) ...................... 11.2 (18.0)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 19.0 (72.0)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 28.8 (109.0)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic Tank Capacity, gal (L) ...................... 10.0 (37.9)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1800 (818)
Tipping Load, lbs (kg) ...................... 3600 (1640)
Breakout force (Lift), lbs (kg) ...................... 2630 (1195)
Breakout force (Tilt), lbs (kg) ...................... 5540 (2520)
Loader Boom Type .................... Vertical-lift (Super Boom)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 44.5 (1130)
Height (Operator Cab), in (mm) ...................... 77.8 (1975)
Height (Boom Raised), in (mm) ...................... 150.4 (3820)
Length (w/o Bucket), in (mm) ...................... 105.7 (2685)
Length (Bucket On Ground), in (mm) ...................... 132 (3350)
Width (w/o Bucket), in (mm) ...................... 54 (1370)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 120 (3050)
Dump Angle At Max Height, deg ...................... 52
Dump Height (Fully Raised), in (mm) ...................... 93.6 (2380)
Dump Reach At Max Height, in (mm) ...................... 30.9 (785)
Rollback Angle At Ground Level, deg ...................... 35
Rollback Angle At Max Height, deg ...................... 88
Departure Angle, deg ...................... 23
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 7.1 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 80.2 (2035)
Turning Radius (Front w/o Bucket), in (mm) ...................... 53 (1345)
Turning Radius (Rear), in (mm) ...................... 63.2 (1605)
Shipping weight, lbs (kg) ...................... 5920 (2695)
Operating Weight, lbs (kg) ...................... 6230 (2830)

____________________________________________________________________________________

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS