____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L225 |
New Holland L225 Specifications
The
New Holland L225 skid steer loader driveline system components: FPT F5C E5454
four-cylinder direct injection turbocharged diesel engine with a rated power of
76 hp (57 kW), and single-speed or two-speed hydro transmission. The hydraulic
system has a pump with a rated capacity of 22.4 gal/min (85 l/min) or 34.6
gal/min (131 l/min). The New Holland L225 is equipped with a vertical-lift
boom, ASA 100 drive chains, and 12x16.5 standard tires. The skid steer
has a maximum lift height of 130" (3290 mm) to hinge pin and dump height
of 103" (2615 mm). The rated operating capacity is 2500 lbs (1135 kg), and
tipping load is 5000 lbs (2270 kg).
| Engine Specs |
Engine Model ...................... FPT F5C E5454
Engine Type ...................... 4-cycle vertical in-line liquid-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 195.2 (3.2)
Cylinder Bore, in (mm) ...................... 3.90 (99.0)
Piston Stroke, in (mm) ...................... 4.09 (104.0)
Rated Engine Power, hp (kW) ...................... 76.0 (57.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 305 (226)
Torque Speed, rpm ...................... 1400
Idling Speed, rpm ...................... 1000-2700
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced lubrication
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled
Fuel Tank Capacity, gal (L) ...................... 25.5 (96.5)
Engine Oil Capacity, qts (L) ...................... 10.5 (10.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... ASA 100 roller chain
Front Tire Size ...................... 12.00x16.5
Rear Tire Size ...................... 12.00x16.5
Chaincase Capacity, qts (L) ...................... 7.8 (7.4)
Maximum Speed (Single), mph (km/h) ...................... 7.1 (11.3)
Maximum Speed (Two), mph (km/h) ...................... 10.6 (16.9)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 22.4 (85.0)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 34.6 (131.0)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic Reservoir Capacity, gal (L) ...................... 6.0 (22.8)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2500 (1135)
Tipping Load, lbs (kg) ...................... 5000 (2270)
Breakout force (Lift), lbs (kg) ...................... 5070 (2305)
Breakout force (Tilt), lbs (kg) ...................... 8590 (3905)
Loader Boom Type .................... Vertical-lift (Super Boom)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 52 (1320)
Height (Operator Cab), in (mm) ...................... 78.8 (2000)
Height (Boom Raised), in (mm) ...................... 160 (4055)
Length (w/o Bucket), in (mm) ...................... 117.5 (2985)
Length (Bucket On Ground), in (mm) ...................... 142.8 (3625)
Width (w/o Bucket), in (mm) ...................... 57.6 (1465)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 130 (3290)
Dump Angle At Max Height, deg ...................... 55
Dump Height (Fully Raised), in (mm) ...................... 103 (2615)
Dump Reach At Max Height, in (mm) ...................... 32.3 (820)
Rollback Angle At Ground Level, deg ...................... 34
Rollback Angle At Max Height, deg ...................... 85
Departure Angle, deg ...................... 24
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 80.3 (2040)
Turning Radius (Front w/o Bucket), in (mm) ...................... 56.3 (1430)
Turning Radius (Rear), in (mm) ...................... 70.5 (1790)
Shipping weight, lbs (kg) ...................... 7550 (3430)
Operating Weight, lbs (kg) ...................... 7880 (3580)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |