Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L221 |
New Holland L221 Specifications
The New Holland L221 skid steer loader is powered by 207 cu.in (3.4L) FPT F5H FL463 4-cylinder turbocharged diesel engine with a rated power of 68 hp (51 kW) at 2500 rpm. The New Holland L221 is equipped with a radial-lift boom, 1-speed or 2-speed hydrostatic transmission, ASA 100 drive chains, and 12x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 24.2 gpm (91.5 lpm) or 33.2 gpm (125.7 lpm). The hydraulic pressure is 3045 psi (210 bar). The skid steer loader has a rated operating capacity of 2100 lbs (953 kg) and tipping load of 4200 lbs (1905 kg). The lift height is 123" (3125 mm) to hinge pin, and dump height is 98.2" (2495 mm).
Engine Specs |
Engine Model ...................... FPT F5H FL463
Engine Type ...................... 4-cycle vertical in-line liquid-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 207 (3.4)
Cylinder Bore, in (mm) ...................... 3.90 (99.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Rated Engine Power, hp (kW) ...................... 68.0 (51.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 314 (232)
Torque Speed, rpm ...................... 1400
Idling Speed, rpm ...................... 1000-2700
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced lubrication
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled
Fuel Tank Capacity, gal (L) ...................... 19.5 (74.0)
Engine Oil Capacity, qts (L) ...................... 9.9 (9.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... ASA 100 roller chain
Front Tire Size ...................... 12.00x16.5
Rear Tire Size ...................... 12.00x16.5
Chaincase Capacity, qts (L) ...................... 27.3 (26.0)
Maximum Speed (Single), mph (km/h) ...................... 7.8 (12.5)
Maximum Speed (Two), mph (km/h) ...................... 11.4 (18.3)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 24.2 (91.5)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 33.2 (125.7)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic System Capacity, gal (L) ...................... 8.5 (32.2)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2100 (953)
Tipping Load, lbs (kg) ...................... 4200 (1905)
Breakout force (Lift), lbs (kg) ...................... 4570 (2080)
Breakout force (Tilt), lbs (kg) ...................... 7270 (3305)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 44.5 (1130)
Height (Operator Cab), in (mm) ...................... 78.8 (2000)
Height (Boom Raised), in (mm) ...................... 154.3 (3920)
Length (w/o Bucket), in (mm) ...................... 105.1 (2670)
Length (Bucket On Ground), in (mm) ...................... 129.6 (3290)
Width (w/o Bucket), in (mm) ...................... 57 (1450)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 123 (3125)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 98.2 (2495)
Dump Reach At Max Height, in (mm) ...................... 20.3 (515)
Rollback Angle At Ground Level, deg ...................... 31
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 79.9 (2030)
Turning Radius (Front w/o Bucket), in (mm) ...................... 50.7 (1290)
Turning Radius (Rear), in (mm) ...................... 62.9 (160)
Shipping weight, lbs (kg) ...................... 6670 (3025)
Operating Weight, lbs (kg) ...................... 6970 (3160)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |