____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L220 |
New Holland L220 Specifications
The
New Holland L220 skid steer loader driveline system components: a 133.8 cu.in
(2.2L) Shibaura N844LT 4-cylinder turbocharged diesel engine with a rated power
of 57 hp (42 kW), and one-speed or two-speed hydro transmission. The hydraulic
system has a pump with a rated capacity of 19 gal/min (72 l/min) or 28.8 gal/min
(109 l/min). The New Holland L220 is equipped with a vertical-lift loader boom,
ASA 80 drive chains, and 10x16.5 standard tires. The skid steer has a
maximum lift height of 121" (3075 mm) to hinge pin and dump height of 94.5"
(2400 mm). The rated operating capacity is 2000 lbs (905 kg), and tipping load
is 4000 lbs (1815 kg).
| Engine Specs |
Engine Model ...................... ISM Shibaura N844LT
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.8 (2.16)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Rated Engine Power, hp (kW) ...................... 57.0 (42.0)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 171 (126)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1050-3150
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 22.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line strainer
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 20.0 (75.5)
Engine Oil Capacity, qts (L) ...................... 9.0 (8.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size ...................... 12.00x16.5
Rear Tire Size ...................... 12.00x16.5
Chaincase Capacity, qts (L) ...................... 7.0 (6.7)
Maximum Speed (Single), mph (km/h) ...................... 7.9 (12.7)
Maximum Speed (Two), mph (km/h) ...................... 11.3 (18.0)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 19.0 (72.0)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 28.8 (109.0)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.3 (16.2)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2000 (905)
Tipping Load, lbs (kg) ...................... 4000 (1815)
Breakout force (Lift), lbs (kg) ...................... 3430 (1560)
Breakout force (Tilt), lbs (kg) ...................... 7290 (3315)
Loader Boom Type .................... Vertical-lift (Super Boom)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 44.5 (1130)
Height (Operator Cab), in (mm) ...................... 78.8 (2000)
Height (Boom Raised), in (mm) ...................... 151.4 (3845)
Length (w/o Bucket), in (mm) ...................... 105.7 (2685)
Length (Bucket On Ground), in (mm) ...................... 131.6 (3340)
Width (w/o Bucket), in (mm) ...................... 57 (1450)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 121 (3075)
Dump Angle At Max Height, deg ...................... 52
Dump Height (Fully Raised), in (mm) ...................... 94.5 (2400)
Dump Reach At Max Height, in (mm) ...................... 29.9 (760)
Rollback Angle At Ground Level, deg ...................... 34
Rollback Angle At Max Height, deg ...................... 88
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 80.9 (2055)
Turning Radius (Front w/o Bucket), in (mm) ...................... 50.8 (1290)
Turning Radius (Rear), in (mm) ...................... 63 (1600)
Shipping weight, lbs (kg) ...................... 6150 (2795)
Operating Weight, lbs (kg) ...................... 6450 (2930)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |