____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L218 |
New Holland L218 Specifications
The
New Holland L218 skid steer loader is powered by Shibaura N844LT 4-cycle
4-cylinder turbocharged liquid-cooled diesel engine with a rated power of 57 hp
(42 kW). The New Holland L218 is equipped with a vertical-lift loader boom,
1-speed or 2-speed hydrostatic transmission, ASA 80 drive chains, and 10x16.5
standard tires. The hydraulic system has a pump with fluid flow rate of 19 gpm
(72 lpm) or 28.8 gpm (109 lpm). The hydraulic pressure is 3045 psi (210 bar).
The skid steer has a rated operating capacity of 1800 lbs (818 kg) and tipping
load of 3600 lbs (1640 kg). The lift height is 120" (3050 mm) to hinge pin, and
dump height is 93.5" (2375 mm).
| Engine Specs |
Engine Model ...................... ISM Shibaura N844LT
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.8 (2.16)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Rated Engine Power, hp (kW) ...................... 57.0 (42.0)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 171 (126)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1050-3150
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 22.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line strainer
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 20.0 (75.5)
Engine Oil Capacity, qts (L) ...................... 9.0 (8.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size ...................... 10.00x16.5
Rear Tire Size ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 7.0 (6.7)
Maximum Speed (Single), mph (km/h) ...................... 7.9 (12.7)
Maximum Speed (Two), mph (km/h) ...................... 11.3 (18.0)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 19.0 (72.0)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 28.8 (109.0)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.3 (16.2)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1800 (818)
Tipping Load, lbs (kg) ...................... 3600 (1640)
Breakout force (Lift), lbs (kg) ...................... 2630 (1195)
Breakout force (Tilt), lbs (kg) ...................... 5540 (2520)
Loader Boom Type .................... Vertical-lift (Super Boom)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 44.5 (1130)
Height (Operator Cab), in (mm) ...................... 77.8 (1975)
Height (Boom Raised), in (mm) ...................... 150.4 (3820)
Length (w/o Bucket), in (mm) ...................... 105.7 (2685)
Length (Bucket On Ground), in (mm) ...................... 132 (3350)
Width (w/o Bucket), in (mm) ...................... 54 (1370)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 120 (3050)
Dump Angle At Max Height, deg ...................... 52
Dump Height (Fully Raised), in (mm) ...................... 93.5 (2375)
Dump Reach At Max Height, in (mm) ...................... 30.9 (785)
Rollback Angle At Ground Level, deg ...................... 35
Rollback Angle At Max Height, deg ...................... 88
Departure Angle, deg ...................... 23
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 7.1 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 79.5 (2020)
Turning Radius (Front w/o Bucket), in (mm) ...................... 50.8 (1290)
Turning Radius (Rear), in (mm) ...................... 63.2 (1605)
Shipping weight, lbs (kg) ...................... 5610 (2550)
Operating Weight, lbs (kg) ...................... 5920 (2690)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |