Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L215 |
New Holland L215 Specifications
The New Holland L215 skid steer loader driveline system components: a 133.8 cu.in (2.2L) Shibaura N844LT 4-cylinder IDI turbocharged diesel engine with a rated power of 57 hp (42 kW), and 1-speed hydro transmission. The hydraulic system has a pump with a rated capacity of 15.6 gal/min (59 l/min). The system pressure is 3045 psi (210 bar). The New Holland L215 is equipped with a radial-lift loader boom, ASA 80 drive chains, and 10x16.5 standard tires. The skid steer loader has a max lift height of 112" (2845 mm) to hinge pin and dump height of 88.4" (2245 mm). The rated operating capacity is 1500 lbs (680 kg), and tipping load is 3000 lbs (1360 kg).
Engine Specs |
Engine Model ...................... ISM Shibaura N844LT
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.8 (2.22)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Rated Engine Power, hp (kW) ...................... 57.0 (42.0)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 171 (126)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1050-3150
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 22.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line strainer
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 16.0 (60.5)
Engine Oil Capacity, qts (L) ...................... 7.9 (7.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size ...................... 10.00x16.5
Rear Tire Size ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 6.6 (6.3)
Maximum Speed, mph (km/h) ...................... 7.9 (12.7)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 15.6 (59.0)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.0 (15.1)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1500 (680)
Tipping Load, lbs (kg) ...................... 3000 (1360)
Breakout force (Lift), lbs (kg) ...................... 3145 (1430)
Breakout force (Tilt), lbs (kg) ...................... 4180 (1900)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37 (940)
Height (Operator Cab), in (mm) ...................... 75.5 (1920)
Height (Boom Raised), in (mm) ...................... 141.3 (3590)
Length (w/o Bucket), in (mm) ...................... 95.9 (2435)
Length (Bucket On Ground), in (mm) ...................... 119.3 (3030)
Width (w/o Bucket), in (mm) ...................... 49.2 (1250)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 112 (2845)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 88.4 (2245)
Dump Reach At Max Height, in (mm) ...................... 18.5 (470)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 22
Bucket Width, in (mm) ...................... 60 (1520)
Ground Clearance, in (mm) ...................... 7.1 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 75.6 (1920)
Turning Radius (Front w/o Bucket), in (mm) ...................... 48.6 (1235)
Turning Radius (Rear), in (mm) ...................... 56.5 (1435)
Shipping weight, lbs (kg) ...................... 5060 (2300)
Operating Weight, lbs (kg) ...................... 5350 (2430)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |