____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L190 |
New Holland L190 Specifications
The
New Holland L190 skid steer loader is powered by 274 cu.in (4.5L) FPT F4G E9454
4-cycle 4-cylinder direct injection turbocharged liquid-cooled diesel engine
with a rated power of 83 hp (62 kW) at 2300 rpm. The New Holland L190 is
equipped with two-speed hydrostatic transmission, 100 HD roller chains, and
14x17.5 standard tires. The hydraulic system has a pump with fluid flow rate of
21.9 gpm (83 lpm). The hydraulic pressure is 3050 psi (210 bar). The skid steer
loader has a rated operating capacity of 2800 lbs (1270 kg) and tipping load of
5600 lbs (2450 kg). The boom lifting force is 6230 lbs (2825 kg), and bucket
breakout force is 7670 lbs (3480 kg).
| Engine Specs |
Engine Model ...................... FPT F4G E9454
Engine Type ...................... 4-cycle 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 274 (4.48)
Cylinder Bore, in (mm) ...................... 4.09 (104.0)
Piston Stroke, in (mm) ...................... 5.20 (132.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 83.0 (62.0)
Rated Engine Speed, rpm ...................... 2300
Maximum Torque, Nm (lb-ft) ...................... 390 (288)
Torque Speed, rpm ...................... 1300
Fast Idle Speed, rpm ...................... 2355-2475
Low Idle Speed, rpm ...................... 1000-1150
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Tank Capacity, gal (L) ...................... 26.5 (100.0)
Oil Capacity, qts (L) ...................... 11.7 (11.0)
Coolant Capacity, qts (L) ...................... 18.4 (17.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Hydrostatic, chain drive
Number of Gears ...................... Two (high/low)
Chain Drive Type ...................... 100 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 14x17.5 HD
Tire Size (Opt) ...................... 33x15.5-12
Chaincase Capacity, qts (L) ...................... 7.2 (6.8)
Travel Speed (Low), mph (kph) ...................... 6.3 (10.1)
Travel Speed (High), mph (kph) ...................... 10.3 (16.6)
| Hydraulic System |
Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ......................21.9 (83.0)
Pump Flow (Opt), gpm (Lpm) ...................... 37.3 (141.4)
System Pressure, Bar (psi) ...................... 210 (3050)
Hydraulic Reservoir Capacity, qts (L) ...................... 20.0 (18.9)
Hydraulic System Capacity, gal (L) ...................... 15.0 (56.8)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2800 (1270)
Tipping Load, lbs (kg) ...................... 5600 (2450)
Boom Lifting Force, lbs (kg) ...................... 6230 (2825)
Bucket Breakout Force, lbs (kg) ...................... 7670 (3480)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 51 (1295)
Height (Boom Raised), in (mm) ...................... 152.9 (3885)
Height (Operator Cab), in (mm) ...................... 80.3 (2040)
Length (w/o Bucket), in (mm) ...................... 115 (2920)
Length (Bucket On Ground), in (mm) ...................... 148.2 (3765)
Width (w/o Bucket), in (mm) ...................... 76.4 (1940)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 127.6 (3240)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 102.8 (2610)
Dump Reach At Max Height, in (mm) ...................... 31.7 (805)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 10.6 (270)
Turning Radius (w/Bucket), in (mm) ...................... 79 (2005)
Shipping Weight, lbs (kg) ...................... 7040 (3200)
Operating Weight, lbs (kg) ...................... 7765 (3520)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |