____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L180 |
New Holland L180 Specifications
The
New Holland L180 skid steer loader driveline system components: a 195 cubic
inches (3.2 L) FPT F5C E9454 4-cylinder direct injection turbocharged diesel
engine with a rated power of 69 hp (51 kW), and single-speed or two-speed
hydrostatic transmission. The hydraulic system has a pump with a rated capacity
of 20 gal/min (79.6 l/min). The system pressure is 3050 psi (210 bar). The New
Holland L180 is equipped with 100 HD roller chains and 12x16.5 tires. The skid
steer loader has a lift height of 126.8" (3220 mm) to hinge pin and dump height
of 94.7" (2405 mm). The rated operating capacity is 2200 lbs (998 kg), and
tipping load is 4400 lbs (1995 kg).
| Engine Specs |
Engine Model ...................... FPT F5C E9454
Engine Type ...................... 4-cycle 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 195 (3.19)
Cylinder Bore, in (mm) ...................... 3.89 (99.0)
Piston Stroke, in (mm) ...................... 4.09 (104.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 69.0 (51.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 275 (203)
Torque Speed, rpm ...................... 1400
Fast Idle Speed, rpm ...................... 2600-2750
Low Idle Speed, rpm ...................... 1075-1175
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Tank Capacity, gal (L) ...................... 22.9 (86.7)
Oil Capacity, qts (L) ...................... 9.0 (8.5)
Coolant Capacity, qts (L) ...................... 12.1 (11.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Hydrostatic, chain drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (high/low)
Chain Drive Type ...................... 100 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 12x16.5 HD
Tire Size (Opt) ...................... 33x15.5-12
Chaincase Capacity, qts (L) ...................... 6.8 (6.4)
Travel Speed (Std), mph (kph) ...................... 7.0 (11.2)
Travel Speed (Opt), mph (kph) ...................... 11.3 (18.2)
| Hydraulic System |
Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ......................21.0 (79.6)
Pump Flow (Opt), gpm (Lpm) ...................... 35.8 (135.7)
System Pressure, Bar (psi) ...................... 210 (3050)
Hydraulic Reservoir Capacity, qts (L) ...................... 20.0 (18.9)
Hydraulic System Capacity, gal (L) ...................... 15.0 (56.8)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2200 (998)
Tipping Load, lbs (kg) ...................... 4400 (1995)
Boom Lifting Force, lbs (kg) ...................... 4195 (1900)
Bucket Breakout Force, lbs (kg) ...................... 6034 (2737)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 48 (1220)
Height (Boom Raised), in (mm) ...................... 147.3 (3740)
Height (Operator Cab), in (mm) ...................... 78.7 (2000)
Length (w/o Bucket), in (mm) ...................... 112 (2845)
Length (Bucket On Ground), in (mm) ...................... 141.2 (3585)
Width (w/o Bucket), in (mm) ...................... 71.3 (1810)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 126.8 (3220)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 94.7 (2405)
Dump Reach At Max Height, in (mm) ...................... 39.5 (1000)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.9 (225)
Turning Radius (w/Bucket), in (mm) ...................... 78 (1980)
Shipping Weight, lbs (kg) ...................... 6480 (2945)
Operating Weight, lbs (kg) ...................... 7130 (3235)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |