____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 4000V |
Mustang 4000V Specifications
The
Mustang 4000V skid steer loader is powered by 273 cu.in (4.5L) Cummins QSB4.5
four-stroke four-cylinder vertical in-line turbocharged liquid-cooled diesel
engine with a rated power of 99 hp (74 kW) at 2200 rpm. The Mustang 4000V is
equipped with a vertical-lift loader boom, two-speed hydrostatic transmission,
100H drive chains, and 14x17.5 HD standard tires. The hydraulic system has a
pump with fluid flow rate of 32 gpm (121 lpm) or 40.8 gpm (154 lpm). The skid
steer loader has a rated operating capacity of 4000 lbs (1814 kg) and tipping
load of 8000 lbs (3630 kg). The lift height is 143.6" (3645 mm) to hinge
pin, and dump height is 114.8" (2915 mm).
| Engine Specs |
Engine Model ...................... Cummins QSB4.5
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 273 (4.5)
Cylinder Bore, in (mm) ...................... 4.02 (102.0)
Piston Stroke, in (mm) ...................... 5.39 (137.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 99.0 (74.0)
Rated Engine Speed, rpm ...................... 2200
Maximum Torque, Nm (lb-ft) ...................... 442 (326)
Torque Speed, rpm ...................... 1300
Compression Ratio ...................... 16.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Bosch Electronic
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Tier 3
Fuel Tank Capacity, gal (L) ...................... 31.3 (118.0)
Engine Oil Capacity, qts (L) ...................... 11.8 (11.1)
Cooling System Capacity, qts (L) ...................... 16.0 (15.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 130
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Two (Low-high)
Chain Drive Type ...................... 100H roller chain
Front Tire Size ...................... 14x17.5 HD
Rear Tire Size ...................... 14x17.5 HD
Chaincase Capacity, qts (L) ...................... 12.0 (11.4)
Maximum Speed (Low), mph (km/h) ...................... 6.5 (10.5)
Maximum Speed (High), mph (km/h) ...................... 11.2 (18.0)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 32.0 (121.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 40.8 (154.0)
System Pressure, Bar (psi) ...................... 228 (3300)
Hydraulic Reservoir Capacity, gal (L) ...................... 16.8 (63.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 4000 (1814)
Tipping Load, lbs (kg) ...................... 8000 (3630)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 54.6 (1385)
Height (Operator Cab), in (mm) ...................... 82 (2085)
Height (Boom Raised), in (mm) ...................... 186.8 (4745)
Length (w/o Bucket), in (mm) ...................... 121.5 (3085)
Length (Bucket On Ground), in (mm) ...................... 158.5 (4025)
Width (w/o Bucket), in (mm) ...................... 79.5 (2020)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 143.6 (3645)
Dump Angle At Max Height, deg ...................... 31
Dump Height (Fully Raised), in (mm) ...................... 114.8 (2915)
Dump Reach At Max Height, in (mm) ...................... 39.5 (1005)
Rollback Angle At Ground Level, deg ...................... 31
Rollback Angle At Max Height, deg ...................... 100
Departure Angle, deg ...................... 19
Bucket Width, in (mm) ...................... 84 (2135)
Ground Clearance, in (mm) ...................... 7.3 (185)
Turning Radius (Front w/Bucket), in (mm) ...................... 88.5 (2250)
Turning Radius (Front w/o Bucket), in (mm) ...................... 50.8 (1290)
Turning Radius (Rear), in (mm) ...................... 70.5 (1790)
Operating Weight, lbs (kg) ...................... 11100 (5035)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |