____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2200R |
Mustang 2200R Specifications
The
Mustang 2200R skid steer loader is powered by 202.6 cu.in (3.32L) Yanmar
4TNV98CT-NMS 4-cylinder vertical in-line turbocharged liquid-cooled
diesel engine with a rated power of 70.7 hp (52.7 kW). The Mustang 2200R is
equipped with a radial-lift loader boom, one-speed or two-speed hydrostatic
transmission, 100H drive chains, and 12x16.5 HD standard tires. The hydraulic
system has a pump with fluid flow rate of 23.5 gpm (89.6 lpm) or 35 gpm (132.6
lpm). The skid steer loader has a rated operating capacity of 2200 lbs (998 kg)
and tipping load of 4400 lbs (1995 kg). The max lift height is 123" (3125 mm) to
hinge pin, and dump height is 94" (2390 mm).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98CT-NMS
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.6 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 70.7 (52.7)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 294 (217)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 18.0 (68.1)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 100H roller chain
Front Tire Size ...................... 12x16.5 HD
Rear Tire Size ...................... 12x16.5 HD
Chaincase Capacity, qts (L) ...................... 10.1 (9.5)
Maximum Speed (Single), mph (km/h) ...................... 8.0 (12.9)
Maximum Speed (Two), mph (km/h) ...................... 11.9 (19.2)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 23.5 (89.6)
Pump Capacity (High Flow), gpm (Lpm) ...................... 35.0 (132.6)
System Pressure, Bar (psi) ...................... 228 (3300)
Hydraulic Reservoir Capacity, gal (L) ...................... 8.0 (30.3)
Hydraulic System Capacity, gal (L) ...................... 12.0 (45.4)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2200 (998)
Tipping Load, lbs (kg) ...................... 4400 (1995)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 43 (1090)
Height (Operator Cab), in (mm) ...................... 81 (2055)
Height (Boom Raised), in (mm) ...................... 161 (4090)
Length (w/o Bucket), in (mm) ...................... 105 (2665)
Length (Bucket On Ground), in (mm) ...................... 136.5 (3465)
Width (w/o Bucket), in (mm) ...................... 65.5 (1665)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 123 (3125)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 94 (2390)
Dump Reach At Max Height, in (mm) ...................... 27 (685)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 70 (1780)
Ground Clearance, in (mm) ...................... 8 (203)
Turning Radius (Front w/Bucket), in (mm) ...................... 87.5 (2225)
Turning Radius (Front w/o Bucket), in (mm) ...................... 52 (1320)
Turning Radius (Rear), in (mm) ...................... 60 (1525)
Operating Weight, lbs (kg) ...................... 7980 (3620)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |