Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2099 |
Mustang 2099 Specifications
The Mustang 2099 skid steer loader driveline system components: a 269 cu.in (4.4L) Perkins 1104C-44 4-cylinder direct injection liquid-cooled diesel engine with a rated power of 86 hp (64 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 29 gal/min (110 l/min). The system pressure is 3300 psi (228 bar). The Mustang 2099 is equipped with a radial-lift boom, 100HK drive chains, and 14x17.5 tires. The skid steer loader has a max lift height of 142" (3605 mm) to hinge pin and dump height of 109.5" (2780 mm). The rated operating capacity is 3400 lbs (1542 kg), and tipping load is 6800 lbs (3085 kg).
Engine Specs |
Engine Model ...................... Perkins 1104C-44
Engine Type ...................... 4-stroke liquid-cooled diesel
Number of Cylinders ...................... 4, in-line
Engine Bore, in (mm) ...................... 4.13 (105.0)
Engine Stroke, in (mm) ...................... 5.00 (127.0)
Displacement, cu.in (L) ...................... 269 (4.40)
Aspiration Type ............... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 86.0 (64.0)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (ft-lbs) ...................... 302 (223)
Torque Speed, rpm ...................... 1400
Combustion System ...................... Direct injection
Compression Ratio ...................... 19.3:1
Firing Order ...................... 1-3-4-2
Injection Pump Type ...................... Rotary
Governor Type ...................... Mechanical
Fuel Filter Type ...................... Single element or replaceable paper element
Lubrication System ...................... Gear pump
Oil Filter Type ...................... Spin-on full flow or replaceable element
Oil Pump Type ...................... Differential rotor, gear driven pump
Cooling System ...................... Gear driven centrifugal coolant pump
Air Cleaner Type ...................... Dual, dry element
Intake Valve Clearance, in (mm) ...................... 0.008 (0.20)
Exhaust Valve Clearance, in (mm) ...................... 0.018 (0.45)
Fuel Tank Capacity, gal (L) ...................... 28.9 (109.5)
Oil Capacity, qts (L) ...................... 8.5 (8.0)
Coolant Capacity, qts (L) ...................... 12.7 (12.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 85
Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 100HK roller chain
Front Tire Size ...................... 14x17.5
Rear Tire Size ...................... 14x17.5
Chaincase Capacity, qts (L) ...................... 12.0 (11.4)
Maximum Speed (Single), mph (km/h) ...................... 6.5 (9.8)
Maximum Speed (Two), mph (km/h) ...................... 11.2 (18.0)
Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 29.0 (110.0)
System Pressure, Bar (psi) ...................... 228 (3300)
Hydraulic Reservoir Capacity, gal (L) ...................... 13.0 (50.0)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 3400 (1542)
Tipping Load, lbs (kg) ...................... 6800 (3085)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 54.3 (1380)
Height (Operator Cab), in (mm) ...................... 81.1 (2050)
Height (Boom Raised), in (mm) ...................... 185.8 (4720)
Length (w/o Bucket), in (mm) ...................... 122 (3100)
Length (Bucket On Ground), in (mm) ...................... 159 (4040)
Width (w/o Bucket), in (mm) ...................... 80.3 (2040)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 142 (3605)
Dump Angle At Max Height, deg ...................... 36
Dump Height (Fully Raised), in (mm) ...................... 109.5 (2780)
Dump Reach At Max Height, in (mm) ...................... 36.8 (935)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 85
Departure Angle, deg ...................... 21
Bucket Width, in (mm) ...................... 84 (2135)
Ground Clearance, in (mm) ...................... 8.5 (215)
Turning Radius (Front w/Bucket), in (mm) ...................... 98.5 (2500)
Turning Radius (Front w/o Bucket), in (mm) ...................... 60.6 (1540)
Turning Radius (Rear), in (mm) ...................... 80.5 (2045)
Operating Weight, lbs (kg) ...................... 10180 (4620)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |