____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2056 |
Mustang 2056 Specifications
The
Mustang 2056 Series 2 skid steer loader driveline system components: a 202.5
cu.in (3.3L) Yanmar 4TNV98 four-cylinder direct injection liquid-cooled
diesel engine with a rated power of 68 hp (50.7 kW), and 2-speed hydrostatic
transmission. The hydraulic system has a pump with a rated capacity of 19
gal/min (72 l/min) or 30 gal/min (114 l/min). The Mustang 2056 is equipped with
a radial-lift loader boom, 100K drive chains, and 12x16.5 HD standard tires. The
skid steer loader has a maximum lift height of 121.5" (3085 mm) to hinge pin and
dump height of 91.8" (2330 mm). The rated operating capacity is 1900 lbs (862
kg), and tipping load is 3800 lbs (1725 kg).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 68.0 (50.7)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 244 (179)
Torque Speed, rpm ...................... 1650
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Interim Tier 4
Fuel Tank Capacity, gal (L) ...................... 15 (56.8)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 100
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Two
Chain Drive Type ...................... 100K roller chain
Front Tire Size ...................... 12x16.5 HD
Rear Tire Size ...................... 12x16.5 HD
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 13.3 (19.9)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Std), gpm (Lpm) ...................... 19.0 (72.0)
Pump Capacity (Opt), gpm (Lpm) ...................... 30.0 (114.0)
System Pressure, Bar (psi) ...................... 197 (2855)
Hydraulic Reservoir Capacity, gal (L) ...................... 15 (56.8)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1900 (862)
Tipping Load, lbs (kg) ...................... 3800 (1725)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 42 (1065)
Height (Operator Cab), in (mm) ...................... 79.4 (2015)
Height (Boom Raised), in (mm) ...................... 153.5 (3900)
Length (w/o Bucket), in (mm) ...................... 95.1 (2415)
Length (Bucket On Ground), in (mm) ...................... 126.3 (3210)
Width (w/o Bucket), in (mm) ...................... 63 (1600)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 121.5 (3085)
Dump Angle At Max Height, deg ...................... 43
Dump Height (Fully Raised), in (mm) ...................... 91.8 (2330)
Dump Reach At Max Height, in (mm) ...................... 22.8 (580)
Rollback Angle At Ground Level, deg ...................... 23
Rollback Angle At Max Height, deg ...................... 88
Departure Angle, deg ...................... 23
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 79.5 (2020)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44 (1110)
Turning Radius (Rear), in (mm) ...................... 57.3 (1455)
Operating Weight, lbs (kg) ...................... 6700 (3040)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |