____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2054 |
Mustang 2054 Specifications
The
Mustang 2054 skid steer loader is powered by Yanmar 4TNV88 four-cylinder
vertical in-line naturally aspirated liquid-cooled diesel engine with a rated
power of 47 hp (34.2 kW) at 2600 rpm. The Mustang 2054 is equipped with a
radial-lift loader boom, one-speed hydrostatic transmission, 80K drive chains,
and 10x16.5 HD standard tires. The hydraulic system has a pump with fluid flow
rate of 18 gpm (68.1 lpm) or 28 gpm (106 lpm). The hydraulic pressure is 2855
psi (197 bar). The skid steer has a rated operating capacity of 1650 lbs
(748 kg) and tipping load of 3300 lbs (1500 kg). The max lift height is 116"
(2945 mm) to hinge pin, and dump height is 91.9" (2335 mm).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV88
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.6 (2.19)
Cylinder Bore, in (mm) ...................... 3.47 (88.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Rated Engine Power, hp (kW) ...................... 47.0 (34.2)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 145 (108)
Torque Speed, rpm ...................... 1680
Aspiration Type ...................... Naturally aspirated
Firing Order ...................... 1-3-4-2
Direction of Rotation ...................... Counterclockwise (Flywheel Side)
Combustion System ...................... Ball type swirl chamber
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... Replaceable element
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Emission Level ...................... Final Tier 3
Intake Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Exhaust Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Fuel Tank Capacity, gal (L) ...................... 15 (57.0)
Engine Oil Capacity, qts (L) ...................... 9.1 (8.6)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80K roller chain
Front Tire Size ...................... 10x16.5 HD
Rear Tire Size ...................... 10x16.5 HD
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 7.2 (10.9)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Std), gpm (Lpm) ...................... 18.0 (68.1)
Pump Capacity (Opt), gpm (Lpm) ...................... 28.0 (106.0)
System Pressure, Bar (psi) ...................... 197 (2855)
Hydraulic Reservoir Capacity, gal (L) ...................... 11.9 (45.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1650 (748)
Tipping Load, lbs (kg) ...................... 3300 (1500)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 38.6 (980)
Height (Operator Cab), in (mm) ...................... 77.8 (1975)
Height (Boom Raised), in (mm) ...................... 146.5 (3720)
Length (w/o Bucket), in (mm) ...................... 96.4 (2450)
Length (Bucket On Ground), in (mm) ...................... 125.6 (3190)
Width (w/o Bucket), in (mm) ...................... 60.8 (1545)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 116 (2945)
Dump Angle At Max Height, deg ...................... 34
Dump Height (Fully Raised), in (mm) ...................... 91.9 (2335)
Dump Reach At Max Height, in (mm) ...................... 24 (610)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 100
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 61 (1550)
Ground Clearance, in (mm) ...................... 7.8 (195)
Turning Radius (Front w/Bucket), in (mm) ...................... 74.4 (1890)
Turning Radius (Front w/o Bucket), in (mm) ...................... 45.7 (1160)
Turning Radius (Rear), in (mm) ...................... 59.2 (1505)
Operating Weight, lbs (kg) ...................... 6075 (2760)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |