____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2026 |
Mustang 2026 Specifications
The
Mustang 2026 skid steer loader is powered by 100.2 cu.in (1.6L) Yanmar 3TNV88
4-cycle 3-cylinder direct injection naturally aspirated liquid-cooled diesel
engine with a rated power of 35 hp (26 kW) at 2800 rpm. The Mustang 2026 is
equipped with a radial-lift loader boom, single-speed hydrostatic transmission,
80K drive chains, and 27x8.5x15 HD standard tires. The hydraulic system has a
pump with fluid flow rate of 14.5 gpm (55 lpm). The skid steer loader has a
rated operating capacity of 1050 lbs (476 kg) and tipping load of 2100 lbs (953
kg). The lift height is 108.1 inches (2745 mm) to hinge pin, and dump height is
84.5 inches (2145 mm).
| Engine Specs |
Engine Model ...................... Yanmar 3TNV88
Engine Type ...................... 4-cycle three-cylinder direct injection liquid-cooled diesel
Number of Cylinders ...................... 3
Engine Bore, in (mm) ...................... 3.47 (88.0)
Engine Stroke, in (mm) ...................... 3.54 (90.0)
Displacement, cu.in (L) ...................... 100.2 (1.642)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 35.0 (26.0)
Rated Engine Speed, rpm ...................... 2800
Idle Speed, rpm ...................... 1100-2900
Maximum Torque, Nm (lb-ft) ...................... 110 (80)
Torque Speed, rpm ...................... 1680
Compression Ratio ...................... 19.1:1
Firing Order ...................... 1-3-2
Direction of Rotation ...................... Counterclockwise (flywheel side)
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical, in-line type
Fuel Filter Type ...................... Single element
Air Cleaner Type ...................... Dual dry element
Lubricating System ...................... Forced lubrication with trochoid pump
Oil Filter Type ...................... Spin on type
Cooling System ...................... Liquid-cooled with radiator
Emission Level ...................... Interim Tier 4
Intake Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Exhaust Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Fuel Tank Capacity, gal (L) ...................... 10.4 (39.5)
Engine Oil capacity, qts (L) ...................... 7.6 (7.2)
Coolant Capacity, qts (L) ...................... 6.3 (6.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80K roller chain
Front Tire Size ...................... 27x8.5x15 HD
Rear Tire Size ...................... 27x8.5x15 HD
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 5.9 (9.5)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 14.5 (55.0)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 8.0 (30.3)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1050 (476)
Tipping Load, lbs (kg) ...................... 2100 (953)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 34.5 (875)
Height (Operator Cab), in (mm) ...................... 70.3 (1785)
Height (Boom Raised), in (mm) ...................... 139.6 (3545)
Length (w/o Bucket), in (mm) ...................... 88.9 (2260)
Length (Bucket On Ground), in (mm) ...................... 114 (2895)
Width (w/o Bucket), in (mm) ...................... 48.4 (1230)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 108.1 (2745)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 84.5 (2145)
Dump Reach At Max Height, in (mm) ...................... 22.8 (580)
Rollback Angle At Ground Level, deg ...................... 29
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 55 (1405)
Ground Clearance, in (mm) ...................... 6.0 (152)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.4 (1765)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.1 (1130)
Turning Radius (Rear), in (mm) ...................... 54.1 (1375)
Operating Weight, lbs (kg) ...................... 4000 (1815)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |