Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2012 |
Mustang 2012 Specifications
The Mustang 2012 skid steer loader driveline system components: a 81.2 cu.in (1.3L) Yanmar 3TNV82 four-cycle three-cylinder direct injection water-cooled diesel engine with a rated power of 24 hp (17.9 kW), and 1-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 10.1 gal/min (38.2 l/min). The system pressure is 2750 psi (190 bar). The Mustang 2012 is equipped with a radial-lift boom, 80K drive chains, and 5.70x12 tires. The skid steer loader has a max lift height of 96" (2440 mm) to hinge pin and dump height of 72.3" (1835 mm). The rated operating capacity is 850 lbs (386 kg), and tipping load is 1700 lbs (772 kg).
Engine Specs |
Engine Model ...................... Yanmar 3TNV82
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 3
Cylinder Bore, in (mm) ...................... 3.23 (82.0)
Piston Stroke, in (mm) ...................... 3.31 (84.0)
Displacement, cu.in (L) ...................... 81.2 (1.33)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 24.0 (17.9)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 86 (68)
Torque Speed, rpm ...................... 1200
Firing Order ...................... 1-3-2
Direction of Rotation ...................... Counterclockwise (flywheel side)
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... Replaceable Element
Air Cleaner Type ...................... Dual dry element
Lubricating System ...................... Forced lubrication with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Emission Level ...................... Interim Tier 4
Fuel Tank Capacity, gal (L) ...................... 7.7 (29.0)
Engine Oil capacity, qts (L) ...................... 5.8 (5.5)
Coolant Capacity, qts (L) ...................... 6.3 (6.0)
Electrical System Rating, Volts ......... 12
Starting System ...................... Electric Starting
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80K roller chain
Front Tire Size ...................... 5.70x12
Rear Tire Size ...................... 5.70x12
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 5.5 (8.9)
Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 10.1 (38.2)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 7.2 (27.3)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 850 (386)
Tipping Load, lbs (kg) ...................... 1700 (772)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 30.5 (775)
Height (Operator Cab), in (mm) ...................... 74.7 (1895)
Height (Boom Raised), in (mm) ...................... 124.7 (3165)
Length (w/o Bucket), in (mm) ...................... 75 (1905)
Length (Bucket On Ground), in (mm) ...................... 101.4 (2575)
Width (w/o Bucket), in (mm) ...................... 35.8 (910)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 96 (2440)
Dump Angle At Max Height, deg ...................... 46
Dump Height (Fully Raised), in (mm) ...................... 72.3 (1835)
Dump Reach At Max Height, in (mm) ...................... 14.8 (375)
Rollback Angle At Ground Level, deg ...................... 23
Rollback Angle At Max Height, deg ...................... 100
Departure Angle, deg ...................... 30
Bucket Width, in (mm) ...................... 36 (915)
Ground Clearance, in (mm) ...................... 5.9 (150)
Turning Radius (Front w/Bucket), in (mm) ...................... 58 (1475)
Turning Radius (Front w/o Bucket), in (mm) ...................... 32.8 (835)
Turning Radius (Rear), in (mm) ...................... 43.2 (1095)
Operating Weight, lbs (kg) ...................... 2980 (1350)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |