____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 1900R |
Mustang 1900R Specifications
The
Mustang 1900R skid steer loader driveline system components: a 202.5 cu.in
(3.3L) Yanmar 4TNV98C-NMS 4-cylinder direct injection diesel engine with a rated
power of 68.4 hp (51.1 kW), and 1-speed or 2-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 18.5 gal/min (70 l/min).
The system pressure is 2750 psi (190 bar). The Mustang 1900R is equipped with a
radial-lift boom, 80K drive chains, and 10x16.5 HD tires. The skid steer loader
has a max lift height of 120.5" (3060 mm) to hinge pin and dump height of 91"
(2310 mm). The rated operating capacity is 1900 lbs (862 kg), and tipping load
is 3800 lbs (1725 kg).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98C-NMS
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 68.4 (51.1)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 241 (178)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 16.5 (62.5)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 100
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 80K roller chain
Front Tire Size ...................... 10x16.5 HD
Rear Tire Size ...................... 10x16.5 HD
Chaincase Capacity, qts (L) ...................... 9.5 (9.0)
Maximum Speed (Single Range), mph (km/h) ...................... 7.5 (12.1)
Maximum Speed (Two Range), mph (km/h) ...................... 12.5 (20.1)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 18.5 (70.0)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 8.0 (30.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1900 (862)
Tipping Load, lbs (kg) ...................... 3800 (1725)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 42 (1065)
Height (Operator Cab), in (mm) ...................... 80 (2030)
Height (Boom Raised), in (mm) ...................... 158 (4015)
Length (w/o Bucket), in (mm) ...................... 94 (2390)
Length (Bucket On Ground), in (mm) ...................... 127 (3225)
Width (w/o Bucket), in (mm) ...................... 64.5 (1640)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 120.5 (3060)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 91 (2310)
Dump Reach At Max Height, in (mm) ...................... 22.5 (570)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 96
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 6.5 (165)
Turning Radius (Front w/Bucket), in (mm) ...................... 79 (2005)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.5 (1130)
Turning Radius (Rear), in (mm) ...................... 58.5 (1485)
Operating Weight, lbs (kg) ...................... 6880 (3120)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |