____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 1650R |
Mustang 1650R Specifications
The
Mustang 1650R skid steer loader is powered by 201.5 cu.in (3.3L) Yanmar
4TNV98C-NMS2 4-cylinder vertical in-line direct injection liquid-cooled diesel
engine with a rated power of 68.4 hp (51.1 kW) at 2500 rpm. The Mustang 1650R is
equipped with a radial-lift loader boom, single or two speed hydrostatic
transmission, 80K drive chains, and 10x16.5 HD standard tires. The hydraulic
system has a pump with fluid flow rate of 18.9 gpm (71.4 lpm). The skid steer
loader has a rated operating capacity of 1650 lbs (748 kg) and tipping load of
3300 lbs (1495 kg). The max lift height is 119 inches (3025 mm) to hinge pin,
and dump height is 93.7 inches (2380 mm).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98C-NMS2
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 201.5 (3.3)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 68.4 (51.1)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 241 (178)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 16.5 (62.5)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 100
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 80K roller chain
Front Tire Size ...................... 10x16.5 HD
Rear Tire Size ...................... 10x16.5 HD
Chaincase Capacity, qts (L) ...................... 9.5 (9.0)
Maximum Speed (Single Range), mph (km/h) ...................... 7.8 (12.6)
Maximum Speed (Two Range), mph (km/h) ...................... 12.1 (19.5)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 18.9 (71.4)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 11.0 (41.6)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1650 (748)
Tipping Load, lbs (kg) ...................... 3300 (1495)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 38.9 (990)
Height (Operator Cab), in (mm) ...................... 76.7 (1950)
Height (Boom Raised), in (mm) ...................... 152.6 (3875)
Length (w/o Bucket), in (mm) ...................... 93.9 (2385)
Length (Bucket On Ground), in (mm) ...................... 122.1 (3100)
Width (w/o Bucket), in (mm) ...................... 63.2 (1605)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 119 (3025)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 93.7 (2380)
Dump Reach At Max Height, in (mm) ...................... 22.8 (580)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 21
Bucket Width, in (mm) ...................... 61.5 (1560)
Ground Clearance, in (mm) ...................... 6.3 (160)
Turning Radius (Front w/Bucket), in (mm) ...................... 73.6 (1870)
Turning Radius (Front w/o Bucket), in (mm) ...................... 45.4 (1155)
Turning Radius (Rear), in (mm) ...................... 57.7 (1465)
Operating Weight, lbs (kg) ...................... 6122 (2775)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |