____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 1350R |
Mustang 1350R Specifications
The
Mustang 1350R skid steer loader is powered by 133.6 cu.in (2.2L) Yanmar
4TNV88C-KMS 4-cycle 4-cylinder vertical in-line direct injection water-cooled
diesel engine with a rated power of 44.5 hp (33 kW) at 2800 rpm. The Mustang
1350R is equipped with a radial-lift loader boom, single-speed hydrostatic
transmission, 80K drive chains, and 10x16.5 HD standard tires. The hydraulic
system has a pump with fluid flow rate of 17 gpm (64.4 lpm). The skid steer
loader has a rated operating capacity of 1350 lbs (612 kg) and tipping load of
2700 lbs (1225 kg). The max lift height is 109.6 inches (2785 mm) to hinge pin,
and dump height is 82.6 inches (2100 mm).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV88C-KMS
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.6 (2.19)
Cylinder Bore, in (mm) ...................... 3.47 (88.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Rated Engine Power, hp (kW) ...................... 44.5 (33.0)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 146 (108)
Torque Speed, rpm ...................... 1820
Aspiration Type ...................... Naturally aspirated
Firing Order ...................... 1-3-4-2
Direction of Rotation ...................... Counterclockwise (Flywheel Side)
Combustion System ...................... Ball type swirl chamber
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... Replaceable element
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Emission Level ...................... Final Tier 4
Intake Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Exhaust Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Fuel Tank Capacity, gal (L) ...................... 16.5 (62.5)
Engine Oil Capacity, qts (L) ...................... 7.8 (7.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80K roller chain
Front Tire Size ...................... 10x16.5 HD
Rear Tire Size ...................... 10x16.5 HD
Chaincase Capacity, qts (L) ...................... 7.3 (7.0)
Maximum Speed, mph (km/h) ...................... 8.0 (12.9)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 17.0 (64.4)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 10.0 (37.9)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1350 (612)
Tipping Load, lbs (kg) ...................... 2700 (1225)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37.6 (955)
Height (Operator Cab), in (mm) ...................... 75.1 (1910)
Height (Boom Raised), in (mm) ...................... 143.9 (3655)
Length (w/o Bucket), in (mm) ...................... 92.2 (2340)
Length (Bucket On Ground), in (mm) ...................... 120.3 (3055)
Width (w/o Bucket), in (mm) ...................... 52.6 (1335)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109.6 (2785)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 82.6 (2100)
Dump Reach At Max Height, in (mm) ...................... 22.7 (575)
Rollback Angle At Ground Level, deg ...................... 29
Rollback Angle At Max Height, deg ...................... 82
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.9 (200)
Turning Radius (Front w/Bucket), in (mm) ...................... 72.5 (1840)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.1 (1130)
Turning Radius (Rear), in (mm) ...................... 54 (1370)
Operating Weight, lbs (kg) ...................... 5078 (2305)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |