Home / Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 320G

John Deere 320G Specifications

The John Deere 320G skid steer loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98C four-cylinder direct injection liquid-cooled diesel engine with a rated power of 66 hp (49.5 kW) at 2500 rpm. The John Deere 320G is equipped with a two-speed hydrostatic transmission, vertical-lift loader boom, 80HD drive chains, and 12.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 21 gpm (79.6 lpm) or 30 gpm (113.7 lpm). The skid steer loader has a rated operating capacity of 2190 lbs (995 kg) and tipping load of 4380 lbs (1990 kg). The boom breakout force is 3725 lbs (1690 kg), and bucket breakout force is 6000 lbs (2725 kg).

Engine Specs

Engine Model ...................... Yanmar 4TNV98C
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 66.0 (49.5)
Maximum Engine Power, hp (kW) ...................... 69.0 (51.7)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 241 (178)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 21.0 (79.6)
Engine Oil Capacity, qts (L) ...................... 13.1 (12.5)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 75

Drive Train

Drive System Type ...................... 4-wheel drive, hydrostatic transmission
Number of Gears ...................... Two
Chain Drive Type ...................... 80HD roller chains
Brakes Type ...................... Integral automatic wet disc
Front Tire Size ...................... 12.00x16.5
Rear Tire Size ...................... 12.00x16.5
Chain Case Capacity, gal (L) ...................... 5.5 (20.8)
Forward Speed, mph (kph) ...................... 12.0 (19.3)
Reverse Speed, mph (kph) ...................... 12.0 (19.3)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow (Standard), gpm (Lpm) ...................... 21.0 (79.6)
Pump Flow (High-Flow), gpm (Lpm) ...................... 30.0 (113.7)
System Pressure, Bar (psi) ...................... 224 (3250)
Hydraulic Tank Capacity, gal (L) ...................... 7.0 (26.5)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2190 (995)
Tipping Load, lbs (kg) ...................... 4380 (1990)
Boom Breakout Force, lbs (kg) ...................... 3725 (1690)
Bucket Breakout Force, lbs (kg) ...................... 6000 (2725)
Loader Boom Type ...................... Vertical-lift

Dimensions and Weight

Wheelbase, in (mm) ...................... 44.3 (1125)
Height (Operator Cab), in (mm) ...................... 81.1 (2060)
Length (w/o Bucket), in (mm) ...................... 112.3 (2850)
Length (Bucket On Ground), in (mm) ...................... 136.3 (3460)
Width (w/o Bucket), in (mm) ...................... 67 (1700)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 122.2 (3105)
Dump Angle At Max Height, deg ...................... 43
Dump Height (Fully Raised), in (mm) ...................... 97.7 (2480)
Dump Reach At Max Height, in (mm) ...................... 29.2 (740)
Rollback Angle At Ground Level, deg ...................... 33
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 9.3 (235)
Turning Radius (w/Bucket), in (mm) ...................... 79.6 (2020)
Shipping Weight, lbs (kg) ...................... 6550 (2980)
Operating Weight, lbs (kg) ...................... 7150 (3250)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS