Home / Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 318G |
John Deere 318G Maintenance
The John Deere 318G skid steer loader driveline system components: a 128.1 cu.in (2.1L) Yanmar 4TNV86CHT 4-cylinder turbocharged diesel engine with a rated power of 61 hp (45.6 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 17 gal/min (64 l/min). The system relief pressure is 3450 psi (238 bar). The John Deere 318G is equipped with vertical-lift loader boom, 80 HD drive chains, and 10x16.5 tires. The skid steer has a maximum lift height of 120" (3050 mm) to hinge pin and dump height of 94.4" (2400 mm). The rated operating capacity is 1945 lbs (883 kg), and tipping load is 3890 lbs (1766 kg).
Refill Capacities |
Engine Oil Capacity, gal (L) ...................... 2.0 (7.5)
Engine Coolant Capacity, gal (L) ...................... 3.2 (12.0)
Hydraulic Fluid Capacity, gal (L) ...................... 6.1 (23.0)
Chain Case Oil Capacity, gal (L) ...................... 3.7 (14.0)
Recommended Oil and Fluid |
Engine Oil Type ...................... Plus 50, SAE 10W-30, SAE 10W-40, SAE 15W-40. API Service CJ-4, CK-4
Engine Coolant Type ...................... John Deere Cool-Gard II or Cool-Gard II PG
Hydraulic Fluid Type ...................... John Deere Plus-50, Hydrau, Hydrau XR, Hydrau-Gard
Chain Case Oil Type ...................... John Deere Plus-50, Hy-Gard, Torq-Gard
Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Clean Primary Air Filter ...................... Every 250 Hours
Clean Fuel Filter ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Primary Fuel Filter ...................... Every 500 Hours
Replace Final Fuel Filter ...................... Every 500 Hours
Replace Primary Engine Air Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Check Chain Case Oil Level ...................... Every 500 Hours
Check Engine Coolant ...................... Every 1000 Hours
Replace Secondary Engine Air Filter ...................... Every 1000 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Service And Refill Cooling System ...................... Every 3000 Hours
Replacement Parts |
Engine Oil Filter. Part Number ...................... MIU800646, M806419
Primary Fuel Filter. Part Number ...................... MIU802421
Final Fuel Filter. Part Number ...................... MIU802154
Primary Engine Air Filter. Part Number ...................... AT338105
Secondary Engine Air Filter. Part Number ...................... AT336803
Hydraulic Oil Filter. Part Number ...................... AT314164
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |