| Home / Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 314G |
John Deere 314G Specifications
The
John Deere 314G skid steer loader driveline system components: Yanmar 4TNV86CT
four-cylinder direct injection turbocharged diesel engine with a rated power of
48 hp (35.8 kW), and single-speed hydrostatic transmission. The hydraulic system
has a pump with a rated capacity of 17 gal/min (64.4 l/min). The system relief
pressure is 3250 psi (224 bar). The John Deere 314G is equipped with a
vertical-lift loader boom, 80HD drive chains, and 10x16.5 tires. The
skid steer loader has a maximum lift height of 120" (3050 mm) to hinge pin and
dump height of 94.3" (2400 mm). The rated operating capacity is 1760 lbs (800
kg), and tipping load is 3520 lbs (1600 kg).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV86CT
Engine Type ...................... Vertical in-line 4-cycle 4-cylinder turbocharged diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 128.1 (2.09)
Cylinder Bore, in (mm) ...................... 3.39 (86.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 48.0 (35.8)
Maximum Engine Power, hp (kW) ...................... 51.0 (37.8)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 168 (124)
Torque Speed, rpm ...................... 1690
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection ...................... High pressure common rail
Fuel System Control ...................... Electronic
Lubrication System ...................... Forced lubrication with trochoid pump
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 19.0 (71.0)
Oil Capacity, qts (L) ...................... 7.9 (7.5)
Coolant Capacity, qts (L) ...................... 12.8 (12.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 70
| Drive Train |
Drive System Type ...................... 4-wheel drive, hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80HD roller chains
Brakes Type ...................... Integral automatic wet disc
Front Tire Size ...................... 10x16.5
Rear Tire Size ...................... 10x16.5
Chain Case Capacity, qts (L) ...................... 14.8 (14.0)
Forward Speed, mph (kph) ...................... 6.7 (10.8)
Reverse Speed, mph (kph) ...................... 6.7 (10.8)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 17.0 (64.4)
System Pressure, Bar (psi) ...................... 224 (3250)
Hydraulic Tank Capacity, gal (L) ...................... 6.1 (23.0)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1760 (800)
Tipping Load, lbs (kg) ...................... 3520 (1600)
Boom Breakout Force, lbs (kg) ...................... 4500 (2045)
Bucket Breakout Force, lbs (kg) ...................... 5000 (2270)
Loader Boom Type ...................... Vertical-lift
| Dimensions and Weight |
Wheelbase, in (mm) ...................... 41.5 (1050)
Height (Operator Cab), in (mm) ...................... 77.2 (1960)
Length (w/o Bucket), in (mm) ...................... 103.5 (2630)
Length (Bucket On Ground), in (mm) ...................... 127.6 (3240)
Width (w/o Bucket), in (mm) ...................... 63 (1600)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 120 (3050)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 94.3 (2400)
Dump Reach At Max Height, in (mm) ...................... 34 (860)
Rollback Angle At Ground Level, deg ...................... 30
Departure Angle, deg ...................... 22.3
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 7.1 (180)
Turning Radius (w/Bucket), in (mm) ...................... 79.4 (2010)
Shipping Weight, lbs (kg) ...................... 5790 (2630)
Operating Weight, lbs (kg) ...................... 6315 (2870)
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |