____________________________________________________________________________________
| Home / Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 313 |
John Deere 313 Specifications
The
John Deere 313 skid steer loader is powered by 149.1 cu.in (2.4L) John Deere
PowerTech 4024T 4-cylinder turbocharged diesel engine with a rated power of 45
hp (33.5 kW) at 2400 rpm. The John Deere 313 is equipped with a radial-lift
loader boom, one-speed hydrostatic transmission, 80HZ drive chains, and 10x16.5
standard tires. The hydraulic system has a pump with fluid flow rate of 15 gpm
(56.9 lpm). The hydraulic pressure is 3450 psi (238 bar). The skid steer loader
has a rated operating capacity of 1260 lbs (572 kg) and tipping load of 2525 lbs
(1145 kg). The lift height is 109 inches (2770 mm) to hinge pin, and dump height
is 83.9 inches (2130 mm).
| Engine Specs |
Engine Model ...................... John Deere PowerTech 4024T
Engine Type ...................... Vertical in-line 4-cycle 4-cylinder turbocharged diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 149.1 (2.44)
Cylinder Bore, in (mm) ...................... 3.39 (86.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 45.0 (33.5)
Maximum Engine Power, hp (kW) ...................... 49.0 (36.5)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 188 (139)
Torque Speed, rpm ...................... 1500
Compression Ratio ...................... 18.0:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Injection pump
Air Cleaner Type ...................... Dry dual element
Lubrication System ...................... Full pressure
Cooling System ...................... Liquid-cooled
Emission Level ...................... Tier 4
Fuel Tank Capacity, gal (L) ...................... 17.5 (66.0)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Coolant Capacity, qts (L) ...................... 7.0 (6.6)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 70
| Drive Train |
Drive System Type ...................... 4-wheel drive, hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80HZ roller chains
Brakes Type ...................... Integral automatic wet disc
Front Tire Size (Std) ...................... 10x16.5
Rear Tire Size (Std) ...................... 10x16.5
Front Tire Size (Opt) ...................... 7.00x15
Rear Tire Size (Opt) ...................... 7.00x15
Chain Case Capacity, qts (L) ...................... 15.5 (14.8)
Forward Speed, mph (kph) ...................... 6.8 (10.9)
Reverse Speed, mph (kph) ...................... 6.8 (10.9)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 15.0 (56.9)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Tank Capacity, gal (L) ...................... 5.0 (19.0)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1260 (572)
Tipping Load, lbs (kg) ...................... 2525 (1145)
Boom Breakout Force, lbs (kg) ...................... 2800 (1270)
Bucket Breakout Force, lbs (kg) ...................... 3300 (1500)
Loader Boom Type ...................... Radial-lift
| Dimensions and Weight |
Wheelbase, in (mm) ...................... 37.4 (950)
Height (Operator Cab), in (mm) ...................... 77.2 (1960)
Length (w/o Bucket), in (mm) ...................... 96.1 (2440)
Length (Bucket On Ground), in (mm) ...................... 123.6 (3140)
Width (w/o Bucket), in (mm) ...................... 57.9 (1470)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 83.9 (2130)
Dump Reach At Max Height, in (mm) ...................... 17.4 (440)
Rollback Angle At Ground Level, deg ...................... 30
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 60 (1520)
Ground Clearance, in (mm) ...................... 7.6 (193)
Turning Radius (w/Bucket), in (mm) ...................... 74.4 (1890)
Shipping Weight, lbs (kg) ...................... 4730 (2150)
Operating Weight, lbs (kg) ...................... 5150 (2340)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |