____________________________________________________________________________________
Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl R220 |
Gehl R220 Specifications
The
Gehl R220 skid steer loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98CT
vertical in-line 4-cylinder turbocharged diesel engine with a rated power of 72
hp (53.7 kW) at 2500 rpm. The Gehl R220 is equipped with 1-speed or 2-speed
hydrostatic transmission, radial-lift loader boom, 100H roller chains, and
12x16.5 tires. The hydraulic system has a pump with fluid flow rate of 23.5 gpm
(89.6 lpm). The hydraulic pressure is 3300 psi (228 bar). The skid steer loader
has a rated operating capacity of 2200 lbs (1000 kg) and tipping load of 4400
lbs (2000 kg). The max lift height is 123 inches (3125 mm) to hinge pin, and
dump height is 94 inches (2390 mm).
Engine Specs |
Engine Model ...................... Yanmar 4TNV98CT
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 72.0 (53.7)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 294 (217)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 18.0 (68.1)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low-high)
Chain Drive Type ...................... 100H roller chain
Front Tire Size ...................... 12x16.5
Rear Tire Size ...................... 12x16.5
Chaincase Capacity, qts (L) ...................... 10.1 (9.5)
Maximum Speed (Single Range), mph (km/h) ...................... 8.0 (12.8)
Maximum Speed (Low Range), mph (km/h) ...................... 8.0 (12.8)
Maximum Speed (High Range), mph (km/h) ...................... 11.9 (19.1)
Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 23.5 (89.6)
Pump Capacity (High Flow), gpm (Lpm) ...................... 35.0 (132.6)
System Pressure, Bar (psi) ...................... 228 (3300)
Hydraulic Reservoir Capacity, gal (L) ...................... 8.0 (30.3)
Hydraulic System Capacity, gal (L) ...................... 12.0 (45.4)
Number of Valves ...................... 3
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2200 (1000)
Tipping Load, lbs (kg) ...................... 4400 (2000)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 43 (1090)
Height (Operator Cab), in (mm) ...................... 81 (2055)
Height (Boom Raised), in (mm) ...................... 161 (4090)
Length (w/o Bucket), in (mm) ...................... 105 (2665)
Length (Bucket On Ground), in (mm) ...................... 136.5 (3465)
Width (w/o Bucket), in (mm) ...................... 65.5 (1665)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 123 (3125)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 94 (2390)
Dump Reach At Max Height, in (mm) ...................... 27 (685)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 70 (1780)
Ground Clearance, in (mm) ...................... 8 (203)
Turning Radius (w/Bucket), in (mm) ...................... 87.5 (2225)
Operating Weight, lbs (kg) ...................... 7980 (3620)
____________________________________________________________________________________
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |