____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl R165 |
Gehl R165 Specifications
The
Gehl R165 skid steer loader is powered by 201.5 cu.in (3.3L) Yanmar 4TNV98C-NMS2
4-cylinder vertical in-line direct injection liquid-cooled diesel engine with a
rated power of 68.4 hp (51.1 kW). The Gehl R165 is equipped with a radial-lift
boom, single or two speed hydrostatic transmission, 80K drive chains, and
10x16.5 HD standard tires. The hydraulic system has a pump with fluid flow rate
of 18.9 gpm (71.4 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid
steer loader has a rated operating capacity of 1650 lbs (748 kg) and tipping
load of 3275 lbs (1486 kg). The lift height is 119" (3025 mm) to hinge pin, and
dump height is 93.7" (2380 mm).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98C-NMS2
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 201.5 (3.3)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 68.4 (51.1)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 241 (178)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 16.5 (62.5)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 15.2 (14.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 100
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 80K roller chain
Front Tire Size ...................... 10x16.5 HD
Rear Tire Size ...................... 10x16.5 HD
Chaincase Capacity, qts (L) ...................... 10.0 (9.5)
Maximum Speed (Single), mph (km/h) ...................... 7.6 (12.2)
Maximum Speed (Two), mph (km/h) ...................... 12.1 (19.5)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 18.9 (71.4)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ...................... 11.0 (41.6)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1650 (748)
Tipping Load, lbs (kg) ...................... 3275 (1486)
Breakout Force (Tilt), lbs (kg) ...................... 4590 (2082)
Breakout Force (Lift), lbs (kg) ...................... 3607 (1636)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 38.9 (990)
Height (Operator Cab), in (mm) ...................... 76.7 (1950)
Height (Boom Raised), in (mm) ...................... 152.6 (3875)
Length (w/o Bucket), in (mm) ...................... 93.9 (2385)
Length (Bucket On Ground), in (mm) ...................... 122.1 (3100)
Width (w/o Bucket), in (mm) ...................... 63.2 (1605)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 119 (3025)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 93.7 (2380)
Dump Reach At Max Height, in (mm) ...................... 22.8 (580)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 21
Bucket Width, in (mm) ...................... 61.5 (1560)
Ground Clearance, in (mm) ...................... 6.3 (160)
Turning Radius (Front w/Bucket), in (mm) ...................... 73.6 (1870)
Turning Radius (Front w/o Bucket), in (mm) ...................... 45.4 (1155)
Turning Radius (Rear), in (mm) ...................... 57.7 (1465)
Operating Weight, lbs (kg) ...................... 5930 (2690)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |