____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 5640E |
Gehl 5640E Specifications
The
Gehl 5640E skid steer loader is powered by 190 cu.in (3.1L) Deutz BF4M2011
4-cycle direct injection turbocharged liquid-cooled diesel engine with a rated
power of 82 hp (61 kW) at 2500 rpm. The Gehl 5640E is equipped with a
single-speed or two-speed transmission, 100 roller drive chains, and 12x16.5-10
or 14x17.5-12 tires. The hydraulic system has a pump with fluid flow rate of 23
gpm (87.1 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer
loader has a rated operating capacity of 2200 lbs (1000 kg) and tipping load of
4400 lbs (2000 kg). The lift height is 123 inches (3125 mm) to hinge pin, and
dump height is 93.5 inches (2375 mm).
| Engine Specs |
Engine Model ...................... Deutz BF4M2011 Turbo
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 190 (3.11)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.41 (112.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 82.0 (61.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 270 (199)
Torque Speed, rpm ...................... 1600
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with filter
Fuel Tank Capacity, gal (L) ...................... 19.0 (72.0)
Oil Capacity, qts (L) ...................... 11.5 (10.8)
Valve Clearance (Inlet), in (mm) ...................... 0.012-0.016 (0.30-0.40)
Valve Clearance (Exhaust), in (mm) ...................... 0.020-0.024 (0.50-0.60)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (high/low)
Chain Drive Type ...................... 100 roller chain
Tire Size (Std) ...................... 12x16.5-10
Tire Size (Opt) ...................... 14x17.5-12
Chaincase Capacity, qts (L) ...................... 8.0 (7.5)
Travel Speed (Std), mph (kph) ...................... 8.1 (13.0)
Travel Speed (Opt), mph (kph) ...................... 12.3 (19.8)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow (Std), gpm (Lpm) ...................... 23.0 (87.1)
Pump Flow (Opt), gpm (Lpm) ...................... 36.0 (136.5)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Capacity, gal (L) ...................... 16.0 (61.0)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2200 (1000)
Tipping Load, lbs (kg) ...................... 4400 (2000)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 42.5 (1080)
Height (Operator Cab), in (mm) ...................... 81 (2055)
Height (Boom Raised), in (mm) ...................... 162 (4115)
Length (w/o Bucket), in (mm) ...................... 95.5 (2425)
Length (Bucket On Ground), in (mm) ...................... 131 (3325)
Width (w/o Bucket), in (mm) ...................... 67 (1700)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 123 (3125)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 93.5 (2375)
Dump Reach At Max Height, in (mm) ...................... 32.8 (835)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 84
Departure Angle, deg ...................... 26
Grading Angle, deg ...................... 82
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 8 (205)
Turning Radius (w/Bucket), in (mm) ...................... 82 (2085)
Shipping Weight, lbs (kg) ...................... 6800 (3085)
Operating Weight, lbs (kg) ...................... 7450 (3380)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |