____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 5635 SX |
Gehl 5635SX Specifications
The
Gehl 5635 SX skid steer loader is powered by 178 cu.in (2.9L) Deutz F4M1011F
4-cycle 4-cylinder direct injection diesel engine with a rated power of 56 hp (41.8 kW)
at 2500 rpm. The Gehl 5635SX is equipped with one-speed or two-speed
transmission, radial-lift loader boom, 100H roller chains, and 12x16.5 or
33-15.5x16.5 tires. The hydraulic system has a pump with fluid flow rate of 23
gpm (87.1 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer
loader has a rated operating capacity of 1900 lbs (862 kg) and tipping load of
3800 lbs (1724 kg). The lift height is 122.7 inches (3120 mm) to hinge pin, and
dump height is 93.7 inches (2380 mm).
| Engine Specs |
Engine Model ...................... Deutz F4M1011F
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 178 (2.91)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.41 (112.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 56.0 (41.8)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 176 (130)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Valve Clearance (Inlet), in (mm) ...................... 0.012-0.016 (0.30-0.40)
Valve Clearance (Exhaust), in (mm) ...................... 0.020-0.024 (0.50-0.60)
Fuel Tank Capacity, gal (L) ...................... 19.0 (72.0)
Oil Capacity, qts (L) ...................... 10.5 (10.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low-high)
Chain Drive Type ...................... 100H roller chain
Tire Size (Std) ...................... 12x16.5
Tire Size (Opt) ...................... 33-15.5x16.5
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed (Single Range), mph (km/h) ...................... 8.5 (13.6)
Maximum Speed (Low Range), mph (km/h) ...................... 8.5 (13.6)
Maximum Speed (High Range), mph (km/h) ...................... 12.5 (20.0)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 23.0 (87.1)
Pump Capacity (High Flow), gpm (Lpm) ...................... 36.0 (136.4)
System Pressure (Standard), Bar (psi) ...................... 207 (3000)
System Pressure (High Flow), Bar (psi) ...................... 200 (2900)
Hydraulic Reservoir Capacity, gal (L) ...................... 16.0 (60.5)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1900 (862)
Tipping Load, lbs (kg) ...................... 3800 (1724)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 42 (1070)
Height (Operator Cab), in (mm) ...................... 79.2 (2015)
Height (Boom Raised), in (mm) ...................... 163 (4140)
Length (w/o Bucket), in (mm) ...................... 100.7 (2560)
Length (Bucket On Ground), in (mm) ...................... 133 (3380)
Width (w/o Bucket), in (mm) ...................... 66.2 (1680)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 122.7 (3120)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 93.7 (2380)
Dump Reach At Max Height, in (mm) ...................... 31.2 (795)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 25
Grading Angle, deg ...................... 95
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (w/Bucket), in (mm) ...................... 82 (2085)
Shipping Weight, lbs (kg) ...................... 5925 (2690)
Operating Weight, lbs (kg) ...................... 7170 (3250)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |