Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4840 |
Gehl 4840 Specifications
The Gehl 4840 skid steer loader is powered by 190 cubic inches (3.1 L) Deutz F4M2011 four-cylinder liquid-cooled naturally aspirated diesel engine with a rated power of 61.2 hp (45 kW) at 2500 rpm. The Gehl 4840 is equipped with a single-speed or two-speed transmission, 80 roller drive chains, and 10x16.5-8 or 12x16.5-10 tires. The hydraulic system has a pump with fluid flow rate of 19 gpm (72 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer loader has a rated operating capacity of 1700 lbs (770 kg) and tipping load of 3400 lbs (1540 kg). The lift height is 115.5 inches (2935 mm) to hinge pin, and dump height is 89.5 inches (2275 mm).
Engine Specs |
Engine Model ...................... Deutz F4M2011
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 190 (3.11)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.41 (112.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 61.2 (45.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 195 (144)
Torque Speed, rpm ...................... 1700
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with filter
Fuel Tank Capacity, gal (L) ...................... 17.0 (64.0)
Oil Capacity, qts (L) ...................... 11.5 (10.8)
Valve Clearance (Inlet), in (mm) ...................... 0.012-0.016 (0.30-0.40)
Valve Clearance (Exhaust), in (mm) ...................... 0.020-0.024 (0.50-0.60)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (high/low)
Chain Drive Type ...................... 80 roller chain
Tire Size (Std) ...................... 10x16.5-8
Tire Size (Opt) ...................... 12x16.5-10
Chaincase Capacity, qts (L) ...................... 8.0 (7.5)
Travel Speed (Std), mph (kph) ...................... 8.8 (14.2)
Travel Speed (Opt), mph (kph) ...................... 14.1 (22.5)
Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow (Std), gpm (Lpm) ...................... 19.0 (72.0)
Pump Flow (Opt), gpm (Lpm) ...................... 30.0 (113.7)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Capacity, gal (L) ...................... 12.0 (45.0)
Number of Valves ...................... 3
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1700 (770)
Tipping Load, lbs (kg) ...................... 3400 (1540)
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 41.5 (1055)
Height (Operator Cab), in (mm) ...................... 78 (1980)
Height (Boom Raised), in (mm) ...................... 149 (3785)
Length (w/o Bucket), in (mm) ...................... 93.3 (2370)
Length (Bucket On Ground), in (mm) ...................... 126.3 (3205)
Width (w/o Bucket), in (mm) ...................... 63.5 (1615)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115.5 (2935)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 89.5 (2275)
Dump Reach At Max Height, in (mm) ...................... 25 (635)
Rollback Angle At Ground Level, deg ...................... 27
Rollback Angle At Max Height, deg ...................... 86
Departure Angle, deg ...................... 25
Grading Angle, deg ...................... 91
Bucket Width, in (mm) ...................... 65 (1650)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (w/Bucket), in (mm) ...................... 76 (1930)
Shipping Weight, lbs (kg) ...................... 5825 (2640)
Operating Weight, lbs (kg) ...................... 6480 (2940)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |