____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4635 SXT |
Gehl 4635 SXT Specifications
The
Gehl 4635 SXT skid steer loader is powered by 133 cu.in (2.2L) Deutz BF3M1011F
three-cylinder vertical direct injection turbocharged liquid-cooled diesel engine with a
rated power of 57 hp (42.5 kW) at 2500 rpm. The Gehl 4635SXT is equipped with a
radial-lift loader boom, single-speed hydrostatic transmission, 80E drive
chains, and 7.00x15 standard tires. The hydraulic system has a pump with fluid
flow rate of 19 gpm (72 lpm). The skid steer loader has a rated operating
capacity of 1425 lbs (646 kg) and tipping load of 2850 lbs (1292 kg). The lift
height is 115 inches (2920 mm) to hinge pin, and dump height is 87.2 inches
(2215 mm).
| Engine Specs |
Engine Model ...................... Deutz BF3M1011F
Engine Type ...................... Vertical 3-cylinder liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 133 (2.18)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.41 (112.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 57.0 (42.5)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 190 (140)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-2-3
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Valve Clearance (Inlet), in (mm) ...................... 0.012-0.016 (0.30-0.40)
Valve Clearance (Exhaust), in (mm) ...................... 0.020-0.024 (0.50-0.60)
Fuel Tank Capacity, gal (L) ...................... 15.0 (57.0)
Oil Capacity, qts (L) ...................... 8.5 (8.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80E roller chain
Front Tire Size (Std) ...................... 7.00x15
Rear Tire Size (Std) ...................... 7.00x15
Front Tire Size (Opt) ...................... 10.00x16.5
Rear Tire Size (Opt) ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 8.5 (13.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 19.0 (72.0)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 12.0 (45.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1425 (646)
Tipping Load, lbs (kg) ...................... 2850 (1292)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37 (940)
Height (Operator Cab), in (mm) ...................... 76 (1935)
Height (Boom Raised), in (mm) ...................... 153 (3885)
Length (w/o Bucket), in (mm) ...................... 89.5 (2275)
Length (Bucket On Ground), in (mm) ...................... 121.2 (3080)
Width (w/o Bucket), in (mm) ...................... 58.5 (1485)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115 (2920)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 87.2 (2215)
Dump Reach At Max Height, in (mm) ...................... 27.6 (700)
Rollback Angle At Ground Level, deg ...................... 27
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 28
Grading Angle, deg ...................... 87
Bucket Width, in (mm) ...................... 65 (1650)
Ground Clearance, in (mm) ...................... 7.0 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 77 (1955)
Turning Radius (Front w/o Bucket), in (mm) ...................... 46 (1170)
Turning Radius (Rear), in (mm) ...................... 57 (1450)
Shipping Weight, lbs (kg) ...................... 5200 (2350)
Operating Weight, lbs (kg) ...................... 6100 (2800)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |