____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4635 SX |
Gehl 4635SX Specifications
The
Gehl 4635SX skid steer loader driveline system components: a 133 cu.in (2.2L)
Deutz F3M1011F 3-cylinder naturally aspirated liquid-cooled diesel engine with a
rated power of 44 hp (32.8 kW), and 1-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 19 gal/min (72 l/min). The
system pressure is 2750 psi (190 bar). The Gehl 4635 SX is equipped with a
radial-lift loader boom, 80E drive chains, and 7.00x15 standard tires. The skid
steer loader has a max lift height of 115" (2920 mm) to hinge pin and dump
height of 87.2" (2215 mm). The rated operating capacity is 1425 lbs (646 kg),
and tipping load is 2850 lbs (1292 kg).
| Engine Specs |
Engine Model ...................... Deutz F3M1011F
Engine Type ...................... Vertical 3-cylinder liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 133 (2.18)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.41 (112.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 44.0 (32.8)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 140 (103)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-2-3
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Valve Clearance (Inlet), in (mm) ...................... 0.012-0.016 (0.30-0.40)
Valve Clearance (Exhaust), in (mm) ...................... 0.020-0.024 (0.50-0.60)
Fuel Tank Capacity, gal (L) ...................... 15.0 (57.0)
Oil Capacity, qts (L) ...................... 8.5 (8.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80E roller chain
Front Tire Size (Std) ...................... 7.00x15
Rear Tire Size (Std) ...................... 7.00x15
Front Tire Size (Opt) ...................... 10.00x16.5
Rear Tire Size (Opt) ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 8.5 (13.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 19.0 (72.0)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 12.0 (45.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1425 (646)
Tipping Load, lbs (kg) ...................... 2850 (1292)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37 (940)
Height (Operator Cab), in (mm) ...................... 76 (1935)
Height (Boom Raised), in (mm) ...................... 153 (3885)
Length (w/o Bucket), in (mm) ...................... 89.5 (2275)
Length (Bucket On Ground), in (mm) ...................... 121.2 (3080)
Width (w/o Bucket), in (mm) ...................... 58.5 (1485)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115 (2920)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 87.2 (2215)
Dump Reach At Max Height, in (mm) ...................... 27.6 (700)
Rollback Angle At Ground Level, deg ...................... 27
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 28
Grading Angle, deg ...................... 87
Bucket Width, in (mm) ...................... 65 (1650)
Ground Clearance, in (mm) ...................... 7.0 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 77 (1955)
Turning Radius (Front w/o Bucket), in (mm) ...................... 46 (1170)
Turning Radius (Rear), in (mm) ...................... 57 (1450)
Shipping Weight, lbs (kg) ...................... 5200 (2350)
Operating Weight, lbs (kg) ...................... 6100 (2800)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |