____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4615 |
Gehl 4615 Specifications
The
Gehl SL 4615 skid steer loader is powered by 121.7 cu.in (2.0L) Perkins 104-19
KF 4-cylinder liquid-cooled diesel engine with a rated power of 41 hp
(30.6 kW) at 2800 rpm. The Gehl SL 4615 is equipped with a radial-lift boom,
single-speed hydrostatic transmission, 80H drive chains, and 10.00x16.5 or
31x13.5x15 tires. The hydraulic system has a pump with fluid flow rate of 16 gpm
(60.6 lpm) or 32 gpm (121.3 lpm). The hydraulic pressure is 2800 psi (193 bar).
The skid steer has a rated operating capacity of 1225 lbs (556 kg) and tipping
load of 2450 lbs (1112 kg). The lift height is 114.5" (2910 mm) to hinge pin,
and dump reach at full height is 18" (455 mm).
| Engine Specs |
Engine Model ...................... Perkins 104-19 KF
Engine Type ...................... 4-Stroke 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Cylinder Arrangement ...................... In-line
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.50 (88.9)
Displacement, cu.in (L) ...................... 121.7 (1.995)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 41.0 (30.6)
Rated Engine Speed, rpm ...................... 2800
Compression Ratio ...................... 22.0:1
Firing Order ...................... 1-3-4-2
Maximum Torque, Nm (lb-ft) ...................... 120 (88)
Torque Speed, rpm ...................... 1700
Direction of Rotation ...................... Clockwise, viewed from front
Fuel System ...................... Cassette type fuel injection
Injection Pump Type ...................... DPA
Lift Pump Type ...................... Diaphragm
Lubrication System ...................... Pressurized
Cooling System Type ...................... Water Cooled
Intake Valve Clearance, in (mm) ...................... 0.008 (0.20)
Exhaust Valve Clearance, in (mm) ...................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) ...................... 13.0 (49.0)
Engine Oil Capacity, qts (L) ...................... 7.5 (7.1)
Cooling System Capacity, qts (L) ...................... 8.4 (8.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 35
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 31x13.5x15
Rear Tire Size (Opt) ...................... 31x13.5x15
Maximum Speed, mph (km/h) ...................... 6.5 (10.4)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 16.0 (60.6)
Pump Capacity (High Flow), gpm (Lpm) ...................... 32.0 (121.3)
System Pressure, Bar (psi) ...................... 193 (2800)
Hydraulic Reservoir Capacity, gal (L) ...................... 14.0 (53.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1225 (556)
Tipping Load, lbs (kg) ...................... 2450 (1112)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 36 (915)
Height (Operator Cab), in (mm) ...................... 76 (1930)
Height (Boom Raised), in (mm) ...................... 136 (3455)
Length (w/o Bucket), in (mm) ...................... 88.5 (2250)
Length (Bucket On Ground), in (mm) ...................... 114.8 (2915)
Width (w/o Bucket), in (mm) ...................... 63 (1600)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.5 (2910)
Dump Angle At Max Height, deg ...................... 41
Dump Reach At Max Height, in (mm) ...................... 18 (455)
Rollback Angle At Ground Level, deg ...................... 33
Bucket Width, in (mm) ...................... 65 (1650)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 70 (1780)
Turning Radius (Front w/o Bucket), in (mm) ...................... 45.5 (1155)
Turning Radius (Rear), in (mm) ...................... 54 (1370)
Shipping Weight, lbs (kg) ...................... 4445 (2015)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |