____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4510 |
Gehl 4510 Specifications
The
Gehl SL 4510 skid steer loader is powered by 98 cubic inches (1.6L) Ford KSG-416
4-cycle 4-cylinder gasoline engine with a rated power of 40 hp (29.8 kW) at 3000
rpm. The Gehl SL 4510 is equipped with a radial-lift loader boom, single-speed
hydrostatic transmission, 80H drive chains, and 7.00x15 or 10.00x16.5 tires. The
hydraulic system has a pump with fluid flow rate of 16 gpm (60.6 lpm). The
hydraulic pressure is 2800 psi (193 bar). The skid steer loader has a rated
operating capacity of 3000 lbs (1362 kg) and tipping load of 6000 lbs (2724 kg).
The lift height is 114.5 inches (2910 mm) to hinge pin, and dump reach at max
height is 18 inches (455 mm).
| Engine Specs |
Engine Model ...................... Ford KSG-416
Engine Type ...................... 4-cycle 4-cylinder gasoline engine
Number of Cylinders ...................... Four
Cylinder Bore, in (mm) ...................... 3.19 (81.0)
Piston Stroke, in (mm) ...................... 3.06 (77.6)
Displacement, cu.in (cm3) ...................... 98 (1.6)
Maximum Power, Hp (kW) ...................... 40.0 (29.8)
Maximum Speed, rpm ...................... 3000
Maximum Torque, Nm (lb-ft) ...................... 101 (73)
Torque Speed, rpm ...................... 1900
Compression Ratio ...................... 8.0:1
Firing Order ...................... 1-2-4-3
Fuel System ...................... Carburetor
Fuel Pump Type ...................... Mechanical
Air Cleaner Type ...................... Dry element
Starting System ...................... Electric start
Spark Plug Type ...................... AGR22
Spark Plug Gap, in (mm) ...................... 0.023 (0.58)
Distributor Point Gap, in (mm) ...................... 0.025 (0.64)
Valve Lash (Intake), in (mm) ...................... 0.008 (0.20)
Valve Lash (Exhaust), in (mm) ...................... 0.022 (0.56)
Fuel Tank Capacity, gal (L) ...................... 13.0 (49.0)
Engine Oil Capacity, qts (L) ...................... 3.5 (3.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 37
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Front Tire Size (Std) ...................... 7.00x15
Rear Tire Size (Std) ...................... 7.00x15
Front Tire Size (Opt) ...................... 10.00x16.5
Rear Tire Size (Opt) ...................... 10.00x16.5
Maximum Speed, mph (km/h) ...................... 6.5 (10.4)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 16.0 (60.6)
System Pressure, Bar (psi) ...................... 193 (2800)
Hydraulic Reservoir Capacity, gal (L) ...................... 14.0 (53.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1150 (522)
Tipping Load, lbs (kg) ...................... 2300 (1045)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 36 (915)
Height (Operator Cab), in (mm) ...................... 76 (1930)
Height (Boom Raised), in (mm) ...................... 136 (3455)
Length (w/o Bucket), in (mm) ...................... 88.5 (2250)
Length (Bucket On Ground), in (mm) ...................... 114.8 (2915)
Width (w/o Bucket), in (mm) ...................... 63 (1600)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.5 (2910)
Dump Angle At Max Height, deg ...................... 41
Dump Reach At Max Height, in (mm) ...................... 18 (455)
Rollback Angle At Ground Level, deg ...................... 33
Bucket Width, in (mm) ...................... 65 (1650)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 70 (1780)
Turning Radius (Front w/o Bucket), in (mm) ...................... 45.5 (1155)
Turning Radius (Rear), in (mm) ...................... 54 (1370)
Shipping Weight, lbs (kg) ...................... 4150 (1870)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |