Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 3610

Gehl 3610 Specifications

The Gehl 3610 skid steer loader is powered by 86.6 cu.in (1.4L) Isuzu 3KR1/QT-35 vertical inline 3-cylinder naturally aspirated liquid-cooled diesel engine with a rated power of 30 hp (22.4 kW) at 2700 rpm. The Gehl 3610 is equipped with a radial-lift boom, one-speed hydrostatic transmission, 60H drive chains, and 5.70x15 or 27x8.50x15 tires. The hydraulic system has a pump with fluid flow rate of 11 gpm (42 lpm). The hydraulic pressure is 2200 psi (152 bar). The skid steer has a rated operating capacity of 925 lbs (418 kg) and tipping load of 1850 lbs (835 kg). The lift height is 102 inches (2590 mm) to hinge pin, and dump reach at full height is 15.5 inches (395 mm).

Engine Specs

Engine Model ...................... Isuzu 3KR1 (QT-35)
Engine Type ...................... Vertical inline 3-cylinder liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 86.6 (1.42)
Cylinder Bore, in (mm) ...................... 3.19 (81.0)
Piston Stroke, in (mm) ...................... 3.62 (92.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 30.0 (22.4)
Rated Engine Speed, rpm ...................... 2700
Idling Speed, rpm ...................... 1100
Compression Ratio ...................... 21.0:1
Firing Order ...................... 1-3-2
Fuel System ...................... Fuel injection
Injection Pump ...................... Bosch type
Governor Type ...................... Mechanical
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dry element
Valve Clearance (Intake), in (mm) ...................... 0.010 (0.25)
Valve Clearance (Exhaust), in (mm) ...................... 0.010 (0.25)
Fuel Tank Capacity, gal (L) ...................... 8.5 (32.0)
Oil Capacity, qts (L) ...................... 5.8 (5.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 37

Drive Train

Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 60H roller chain
Front Tire Size (Std) ...................... 5.70x15
Rear Tire Size (Std) ...................... 5.70x15
Front Tire Size (Opt) ...................... 27x8.50x15
Rear Tire Size (Opt) ...................... 27x8.50x15
Chaincase Capacity, qts (L) ...................... 4.0 (3.8)
Maximum Speed, mph (km/h) ...................... 7.0 (11.2)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 11.0 (42.0)
System Pressure, Bar (psi) ...................... 152 (2200)
Hydraulic Reservoir Capacity, gal (L) ...................... 12.0 (45.4)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 925 (418)
Tipping Load, lbs (kg) ...................... 1850 (835)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 32 (815)
Height (Operator Cab), in (mm) ...................... 70 (1780)
Height (Boom Raised), in (mm) ...................... 131 (3325)
Length (w/o Bucket), in (mm) ...................... 76 (1930)
Length (Bucket On Ground), in (mm) ...................... 99 (2515)
Width (w/o Bucket), in (mm) ...................... 52 (1320)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 102 (2590)
Dump Angle At Max Height, deg ...................... 35
Dump Reach At Max Height, in (mm) ...................... 15.5 (395)
Rollback Angle At Ground Level, deg ...................... 32
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 54 (1390)
Ground Clearance, in (mm) ...................... 9 (230)
Turning Radius (Front w/Bucket), in (mm) ...................... 59 (1500)
Turning Radius (Front w/o Bucket), in (mm) ...................... 38 (965)
Turning Radius (Rear), in (mm) ...................... 46 (1170)
Shipping Weight, lbs (kg) ...................... 3140 (1430)
Operating Weight, lbs (kg) ...................... 3450 (1570)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS