____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 3510 |
Gehl 3510 Specifications
The
Gehl 3510 skid steer loader driveline system components: a 67 cu.in (1.1L) Ford
VSG-411 vertical in-line 4-cylinder gasoline engine with a rated power of 27 hp
(20.2 kW), and single-speed hydrostatic transmission. The hydraulic system has a
pump with a rated capacity of 11 gal/min (42 l/min). The system relief pressure
is 2200 psi (152 bar). The Gehl 3510 is equipped with a radial-lift loader boom,
60H drive chains, and 5.70x15 or 27x8.50x15 tires. The skid steer has a maximum
lift height of 102" (2590 mm) to hinge pin and dump reach at max height of 15.5"
(395 mm). The rated operating capacity is 850 lbs (384 kg), and tipping load is
1700 lbs (770 kg).
| Engine Specs |
Engine Model ...................... Ford VSG-411
Engine Type ...................... Vertical 4-cylinder gasoline engine
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 67 (1.1)
Cylinder Bore, in (mm) ...................... 2.70 (68.7)
Piston Stroke, in (mm) ...................... 3.00 (75.7)
Rated Engine Power, hp (kW) ...................... 27.0 (20.2)
Rated Engine Speed, rpm ...................... 3000
Idle Speed, rpm ...................... 700-800
Maximum Torque, Nm (lb-ft) ...................... 74 (55)
Torque Speed, rpm ...................... 1900
Firing Order ...................... 1-2-4-3
Fuel System ...................... Carburator
Air Cleaner Type ...................... Dual element
Spark Plugs Type ...................... AGSF 22C
Spark Plugs Gap, in (mm) ...................... 0.04 (1.0)
Distributor Point Gap, in (mm) ...................... 0.016-0.02 (0.40-0.50)
Valve Lash (Intake), in (mm) ...................... 0.008 (0.22)
Valve Lash (Exhaust), in (mm) ...................... 0.012 (0.32)
Fuel Tank Capacity, gal (L) ...................... 8.5 (32.0)
Oil Capacity, qts (L) ...................... 8.0 (7.6)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 30
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 60H roller chain
Front Tire Size (Std) ...................... 5.70x15
Rear Tire Size (Std) ...................... 5.70x15
Front Tire Size (Opt) ...................... 27x8.50x15
Rear Tire Size (Opt) ...................... 27x8.50x15
Chaincase Capacity, qts (L) ...................... 4.0 (3.8)
Maximum Speed, mph (km/h) ...................... 7.0 (11.2)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 11.0 (42.0)
System Pressure, Bar (psi) ...................... 152 (2200)
Hydraulic Reservoir Capacity, gal (L) ...................... 12.0 (45.4)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 850 (384)
Tipping Load, lbs (kg) ...................... 1700 (770)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 32 (815)
Height (Operator Cab), in (mm) ...................... 70 (1780)
Height (Boom Raised), in (mm) ...................... 131 (3325)
Length (w/o Bucket), in (mm) ...................... 76 (1930)
Length (Bucket On Ground), in (mm) ...................... 99 (2515)
Width (w/o Bucket), in (mm) ...................... 52 (1320)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 102 (2590)
Dump Angle At Max Height, deg ...................... 35
Dump Reach At Max Height, in (mm) ...................... 15.5 (395)
Rollback Angle At Ground Level, deg ...................... 32
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 48 (1220)
Ground Clearance, in (mm) ...................... 9 (230)
Turning Radius (Front w/Bucket), in (mm) ...................... 59 (1500)
Turning Radius (Front w/o Bucket), in (mm) ...................... 38 (965)
Turning Radius (Rear), in (mm) ...................... 46 (1170)
Shipping Weight, lbs (kg) ...................... 2820 (1280)
Operating Weight, lbs (kg) ...................... 3100 (1405)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |