____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 3310 |
Gehl 3310 Specifications
The
Gehl 3310 skid steer loader is powered by 47.7 cubic inches (0.8L) Onan B48G
2-cylinder 4-valve air-cooled gasoline engine with a rated power of 20 hp (14.9
kW) at 3500 rpm. The Gehl 3310 is equipped with a radial-lift loader boom,
single-speed hydrostatic transmission, 60H drive chains, and 5.70x15 (Std) or
27x8.50x15 (Opt) tires. The hydraulic system has a pump with fluid flow rate of
11 gpm (42 lpm). The hydraulic pressure is 2200 psi (152 bar). The skid steer
loader has a rated operating capacity of 750 lbs (340 kg) and tipping load of
1500 lbs (680 kg). The lift height is 102" (2590 mm) to hinge pin, and dump
reach at full height is 15.5" (395 mm).
| Engine Specs |
Engine Model ...................... Onan B48G
Engine Type ...................... 2-cylinder 4-valve air-cooled gasoline
Number of Cylinders ...................... Two
Displacement, cu.in (L) ...................... 47.7 (0.78)
Cylinder Bore, in (mm) ...................... 3.25 (82.6)
Piston Stroke, in (mm) ...................... 2.88 (73.0)
Rated Engine Power, hp (kW) ...................... 20.0 (14.9)
Rated Engine Speed, rpm ...................... 3500
Maximum Torque, Nm (lb-ft) ...................... 44.3 (32)
Torque Speed, rpm ...................... 2400
Compression Ratio ...................... 7.0:1
Crankshaft Alignment ...................... Horizontal
Cylinder Material ...................... Aluminum
Fuel System ...................... Carburetor
Carburetor Model ...................... Nikki
Fuel Pump Type ...................... Pulse
Lubricating System ...................... Full pressure with filter
Spark Plug Type ...................... NGK BPR5EFS or Champion RS14YC
Ignition System ...................... Electronic
Fuel Tank Capacity, gal (L) ...................... 8.5 (32.0)
Oil Capacity, qts (L) ...................... 1.5 (1.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 15
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 60H roller chain
Front Tire Size (Std) ...................... 5.70x15
Rear Tire Size (Std) ...................... 5.70x15
Front Tire Size (Opt) ...................... 27x8.50x15
Rear Tire Size (Opt) ...................... 27x8.50x15
Chaincase Capacity, qts (L) ...................... 4.0 (3.8)
Maximum Speed, mph (km/h) ...................... 7.0 (11.2)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 11.0 (42.0)
System Pressure, Bar (psi) ...................... 152 (2200)
Hydraulic Reservoir Capacity, gal (L) ...................... 12.0 (45.4)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 750 (340)
Tipping Load, lbs (kg) ...................... 1500 (680)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 32 (815)
Height (Operator Cab), in (mm) ...................... 70 (1780)
Height (Boom Raised), in (mm) ...................... 131 (3325)
Length (w/o Bucket), in (mm) ...................... 76 (1930)
Length (Bucket On Ground), in (mm) ...................... 99 (2515)
Width (w/o Bucket), in (mm) ...................... 52 (1320)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 102 (2590)
Dump Angle At Max Height, deg ...................... 35
Dump Reach At Max Height, in (mm) ...................... 15.5 (395)
Rollback Angle At Ground Level, deg ...................... 32
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 48 (1220)
Ground Clearance, in (mm) ...................... 9 (230)
Turning Radius (Front w/Bucket), in (mm) ...................... 59 (1500)
Turning Radius (Front w/o Bucket), in (mm) ...................... 38 (965)
Turning Radius (Rear), in (mm) ...................... 46 (1170)
Shipping Weight, lbs (kg) ...................... 2610 (1190)
Operating Weight, lbs (kg) ...................... 2870 (1300)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |