____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 2600 |
Gehl 2600 Specifications
The
Gehl HL2600 skid steer loader is powered by 60 cu.in (0.98L) Onan NHC/MS
4-cycle 2-cylinder horizontally opposed air-cooled gasoline engine with a rated
power of 22.5 hp (16.7 kW) at 3300 rpm. The Gehl HL2600 is equipped with a
radial-lift boom, single-speed hydrostatic transmission, 60K drive chains, and
5.70x15 or 27x8.50x15 tires. The hydraulic system has a pump with fluid flow
rate of 8 gpm (30.3 lpm). The hydraulic pressure is 2000 psi (138 bar). The skid
steer has a rated operating capacity of 800 lbs (363 kg) and tipping load
of 1600 lbs (725 kg). The lift height is 101" (2565 mm) to hinge pin, and
dump height is 98" (2490 mm).
| Engine Specs |
Engine Model ...................... Onan NHC/MS
Engine Type ...................... 4-cycle 2-cylinder horizontally opposed gasoline engine
Number of Cylinders ...................... Two
Cylinder Bore, in (mm) ...................... 3.56 (90.4)
Piston Stroke, in (mm) ...................... 3.00 (76.2)
Displacement, cu.in (cm3) ...................... 60 (0.98)
Maximum Power, Hp (kW) ...................... 22.5 (16.7)
Maximum Speed, rpm ...................... 3300
Maximum Torque, Nm (lb-ft) ...................... 76 (41)
Torque Speed, rpm ...................... 2200
Compression Ratio ...................... 7.0:1
Fuel System ...................... Carburetor
Carburetor Type ...................... Downdraft or side-draft
Fuel Pump Type ...................... Mechanical
Air Cleaner Type ...................... Dry element
Governor Type ...................... Mechanical flyball
Lubricating System ...................... Full pressure with filter
Cooling System ...................... Pressure air cooled
Starting System ...................... Electric start
Fuel Tank Capacity, gal (L) ...................... 6.5 (24.6)
Engine Oil Capacity, qts (L) ...................... 4.5 (4.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 20
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 60K roller chain
Front Tire Size (Std) ...................... 5.70x15
Rear Tire Size (Std) ...................... 5.70x15
Front Tire Size (Opt) ...................... 27x8.50x15
Rear Tire Size (Opt) ...................... 27x8.50x15
Maximum Speed, mph (km/h) ...................... 6.0 (9.6)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 8.0 (30.3)
System Pressure, Bar (psi) ...................... 138 (2000)
Hydraulic Reservoir Capacity, gal (L) ...................... 9.5 (36.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 800 (363)
Tipping Load, lbs (kg) ...................... 1600 (725)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 32 (815)
Height (Operator Cab), in (mm) ...................... 68.5 (1740)
Height (Boom Raised), in (mm) ...................... 120 (3050)
Length (w/o Bucket), in (mm) ...................... 75.5 (1920)
Length (Bucket On Ground), in (mm) ...................... 94 (2390)
Width (5.70x15 tires, w/o Bucket), in (mm) ...................... 50 (1270)
Width (27x8.50x15 tires, w/o Bucket), in (mm) ...................... 54 (1370)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 101 (2565)
Dump Angle At Max Height, deg ...................... 30
Dump Height (Fully Raised), in (mm) ...................... 98 (2490)
Dump Reach At Max Height, in (mm) ...................... 13.5 (345)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 100
Departure Angle, deg ...................... 30
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 9.0 (230)
Turning Radius (Front w/Bucket), in (mm) ...................... 58 (1475)
Turning Radius (Front w/o Bucket), in (mm) ...................... 38.5 (980)
Turning Radius (Rear), in (mm) ...................... 43 (1090)
Operating Weight, lbs (kg) ...................... 2980 (1350)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |