| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 262D |
Caterpillar 262D Specifications
The
Cat 262D skid steer loader driveline system components: 203.1 cu.in (3.3L)
Caterpillar C3.3B DIT 4-cylinder turbocharged diesel engine with a rated power
of 72.9 hp (54.4 kW), and 1-speed or 2-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 23 gal/min (86 l/min) or 32
gal/min (121 l/min). The Caterpillar 262D is equipped with a vertical-lift
loader boom, 100HS drive chains, and 12.00x16.5 standard tires. The skid steer
loader has a maximum lift height of 124.9" (3170 mm) to hinge pin and dump
height of 93.7" (2380 mm). The rated operating capacity is 2700 lbs (1225 kg),
and tipping load is 5400 lbs (2450 kg).
| Engine Specs |
Engine Model .................... Caterpillar C3.3B DIT
Engine Type .................... 4-cycle liquid cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 203.1 (3.30)
Cylinder Bore, in (mm) .................... 3.70 (94.0)
Piston Stroke, in (mm) .................... 4.72 (120.0)
Aspiration Type .................... Turbocharged
Rated Engine Power, hp (kW) .................... 72.9 (54.4)
Maximum Engine Power, hp (kW) .................... 74.3 (55.4)
Rated Engine Speed, rpm .................... 2400
Compression Ratio .................... 17:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Emission Level .................... Tier 4 Interim
Fuel Tank Capacity, gal (L) .................... 24.8 (94.0)
Oil Capacity, qts (L) .................... 11.8 (11.0)
Coolant Capacity, qts (L) .................... 14.8 (14.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 80
| Drive Train |
Drive System Type .................... Hydrostatic transmission, 4-wheel drive
Number of Gears (Std) .................... Single
Number of Gears (Opt) .................... Two (low-high)
Chain Drive Type .................... 100HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size .................... 12.00x16.5
Rear Tire Size .................... 12.00x16.5
Chaincase Capacity, qts (L) .................... 13.3 (12.7)
Maximum Speed (Single), mph (kph) .................... 7.7 (12.5)
Maximum Speed (Two), mph (kph) .................... 11.0 (17.7)
| Hydraulic System |
Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow (Standard), gpm (Lpm) .................... 23.0 (86.0)
Pump Flow (High Flow), gpm (Lpm) .................... 32.0 (121.0)
System Pressure, Bar (psi) .................... 230 (3336)
Hydraulic Tank Capacity, gal (L) .................... 10.3 (39.0)
Hydraulic System Capacity, gal (L) .................... 13.7 (52.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) .................... 2700 (1225)
Tipping Load, lbs (kg) .................... 5400 (2450)
Bucket Breakout Force, lbs (kg) .................... 7355 (3335)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase, in (mm) .................... 49.2 (1250)
Height (Operator Cab), in (mm) .................... 83.1 (2110)
Height (Boom Raised), in (mm) .................... 157.8 (4010)
Length (w/o Bucket), in (mm) .................... 117.9 (2995)
Length (Bucket On Ground), in (mm) .................... 146.2 (3715)
Width (w/o Bucket), in (mm) .................... 65.8 (1670)
Height to Hinge Pin (Fully Raised), in (mm) .................... 124.9 (3170)
Height to Hinge Pin (Carry Position), in (mm) .................... 7.9 (200)
Dump Angle At Max Height, deg .................... 51
Dump Height (Fully Raised), in (mm) .................... 93.7 (2380)
Dump Reach At Max Height, in (mm) .................... 30.9 (785)
Rollback Angle At Max Height, deg .................... 84
Departure Angle, deg .................... 26
Bucket Width, in (mm) .................... 66 (1675)
Ground Clearance, in (mm) .................... 8.9 (225)
Turning Radius (Front, w/Bucket), in (mm) .................... 85.9 (2180)
Turning Radius (Front, w/o Bucket), in (mm) .................... 55.2 (1400)
Turning Radius (Rear), in (mm) .................... 71.1 (1805)
Shipping Weight, lbs (kg) .................... 7350 (3340)
Operating Weight, lbs (kg) .................... 8000 (3630)
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |