Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 236D3

Caterpillar 236D3 Specifications

The Cat 236D3 skid steer loader is powered by 203.1 cu.in (3.3L) Caterpillar C3.3B DIT 4-cycle 4-cylinder turbocharged diesel engine with a rated power of 73.2 hp (54.6 kW) at 2400 rpm. The Caterpillar 236D3 is equipped with a two-speed hydrostatic transmission, 80HS continuous roller chains, and 10x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 20.3 gpm (77 lpm) or 26 gpm (99 lpm). The hydraulic pressure is 3335 psi (230 bar). The skid steer loader has a rated operating capacity of 1800 lbs (820 kg) and tipping load of 3600 lbs (1640 kg). The boom lifting force is 3844 lbs (1743 kg), and bucket breakout force is 5003 lbs (2270 kg).

Engine Specs

Engine Model .................... Caterpillar C3.3B DIT
Engine Type .................... 4-cycle liquid cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 203.1 (3.30)
Cylinder Bore, in (mm) .................... 3.70 (94.0)
Piston Stroke, in (mm) .................... 4.72 (120.0)
Aspiration .................... Turbocharged
Rated Engine Power, hp (kW) .................... 73.2 (54.6)
Maximum Engine Power, hp (kW) .................... 74.3 (55.4)
Rated Engine Speed, rpm .................... 2400
Compression Ratio .................... 17:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Emission Level .................... Tier 4 Interim
Fuel Tank Capacity, gal (L) .................... 24.8 (94.0)
Oil Capacity, qts (L) .................... 11.8 (11.0)
Coolant Capacity, qts (L) .................... 14.8 (14.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 80

Drive Train

Drive System Type .................... Hydrostatic transmission, 4-wheel chain drive
Number of Gears .................... Two (low-high)
Chain Drive Type .................... 80HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size (Std) .................... 10x16.5
Rear Tire Size (Std) .................... 10x16.5
Front Tire Size (Opt) .................... 12x16.5
Rear Tire Size (Opt) .................... 12x16.5
Chaincase Capacity, qts (L) .................... 9.3 (8.8)
Forward Speed (Low Range), mph (kph) .................... 7.0 (11.2)
Forward Speed (High Range), mph (kph) .................... 10.6 (17.1)
Reverse Speed (Low Range), mph (kph) .................... 7.0 (11.2)
Reverse Speed (High Range), mph (kph) .................... 10.6 (17.1)

Hydraulic System

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow (Standard), gpm (Lpm) .................... 20.3 (77.0)
Pump Flow (High Flow), gpm (Lpm) .................... 26.0 (99.0)
System Pressure, Bar (psi) .................... 230 (3335)
Hydraulic Tank Capacity, gal (L) .................... 10.3 (39.0)
Hydraulic System Capacity, gal (L) .................... 13.2 (50.0)
Number of Valves .................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) .................... 1800 (820)
Tipping Load, lbs (kg) .................... 3600 (1640)
Boom Lifting Force, lbs (kg) .................... 3844 (1743)
Bucket Breakout Force, lbs (kg) .................... 5003 (2270)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase, in (mm) .................... 43.5 (1105)
Height (Operator Cab), in (mm) .................... 81.9 (2080)
Height (Boom Raised), in (mm) .................... 156.5 (3975)
Length (w/o Bucket), in (mm) .................... 108.9 (2765)
Length (Bucket On Ground), in (mm) .................... 137.2 (3485)
Width (w/o Bucket), in (mm) .................... 66 (1675)
Height to Hinge Pin (Fully Raised), in (mm) .................... 122.8 (3120)
Height to Hinge Pin (Carry Position), in (mm) .................... 7.5 (190)
Dump Angle At Max Height, deg .................... 48
Dump Height (Fully Raised), in (mm) .................... 92.9 (2360)
Dump Reach At Max Height, in (mm) .................... 16 (408)
Rollback Angle At Max Height, deg .................... 91
Departure Angle, deg .................... 26
Bucket Width, in (mm) .................... 66 (1675)
Ground Clearance, in (mm) .................... 7.7 (195)
Turning Radius (w/Bucket), in (mm) .................... 82.9 (2105)
Shipping Weight, lbs (kg) .................... 5975 (2715)
Operating Weight, lbs (kg) .................... 6570 (2980)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS