____________________________________________________________________________________
| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 232D |
Caterpillar 232D Specifications
The
Cat 232D skid steer loader driveline system components: Caterpillar C2.2T
four-cylinder direct injection turbocharged diesel engine with a rated power of
65.8 hp (49.1 kW), and 1-speed or 2-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 18 gal/min (69 l/min) or 26
gal/min (99 l/min). The Caterpillar 232D is equipped with a vertical-lift loader
boom, 80HS drive chains, and 10.00x16.5 standard tires. The skid steer loader
has a maximum lift height of 118.1" (3000 mm) to hinge pin and dump height of
88.7" (2255 mm). The rated operating capacity is 1850 lbs (840 kg), and tipping
load is 3700 lbs (1680 kg).
| Engine Specs |
Engine Model .................... Caterpillar C2.2T
Engine Type .................... 4-cycle liquid cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 134.3 (2.19)
Cylinder Bore, in (mm) .................... 3.31 (84.0)
Piston Stroke, in (mm) .................... 3.94 (100.0)
Aspiration Type .................... Turbocharged
Rated Engine Power, hp (kW) .................... 65.8 (49.1)
Maximum Engine Power, hp (kW) .................... 67.1 (50.1)
Rated Engine Speed, rpm .................... 3000
Compression Ratio .................... 23.3:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct injection
Air Cleaner .................... Dual element, radial seal
Emission Level .................... Tier 4 Final
Valve Lash, in (mm) .................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) .................... 15.1 (57.0)
Oil Capacity, qts (L) .................... 10.6 (10.0)
Coolant Capacity, qts (L) .................... 12.7 (12.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 80
| Drive Train |
Drive System Type .................... Hydrostatic transmission, 4-wheel drive
Number of Gears (Std) .................... Single
Number of Gears (Opt) .................... Two (low-high)
Chain Drive Type .................... 80HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size .................... 10.00x16.5
Rear Tire Size .................... 10.00x16.5
Chaincase Capacity, qts (L) .................... 7.4 (7.0)
Maximum Speed (Single), mph (kph) .................... 7.6 (12.3)
Maximum Speed (Two), mph (kph) .................... 11.1 (17.8)
| Hydraulic System |
Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow (Standard), gpm (Lpm) .................... 18.0 (69.0)
Pump Flow (High Flow), gpm (Lpm) .................... 26.0 (99.0)
System Pressure, Bar (psi) .................... 230 (3336)
Hydraulic Tank Capacity, gal (L) .................... 9.0 (34.0)
Hydraulic System Capacity, gal (L) .................... 11.9 (45.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) .................... 1850 (840)
Tipping Load, lbs (kg) .................... 3700 (1680)
Bucket Breakout Force, lbs (kg) .................... 3985 (1807)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase, in (mm) .................... 41.5 (1055)
Height (Operator Cab), in (mm) .................... 79.9 (2030)
Height (Boom Raised), in (mm) .................... 150.9 (3830)
Length (w/o Bucket), in (mm) .................... 99.4 (2525)
Length (Bucket On Ground), in (mm) .................... 127.3 (3235)
Width (w/o Bucket), in (mm) .................... 58.9 (1495)
Height to Hinge Pin (Fully Raised), in (mm) .................... 118.1 (3000)
Height to Hinge Pin (Carry Position), in (mm) .................... 8.4 (215)
Dump Angle At Max Height, deg .................... 47
Dump Height (Fully Raised), in (mm) .................... 88.7 (2255)
Dump Reach At Max Height, in (mm) .................... 25.7 (655)
Rollback Angle At Max Height, deg .................... 88
Departure Angle, deg .................... 28
Bucket Width, in (mm) .................... 60 (1520)
Ground Clearance, in (mm) .................... 6.7 (170)
Turning Radius (Front, w/Bucket), in (mm) .................... 77.8 (1975)
Turning Radius (Front, w/o Bucket), in (mm) .................... 43.4 (1100)
Turning Radius (Rear), in (mm) .................... 59.6 (1515)
Shipping Weight, lbs (kg) .................... 5700 (2590)
Operating Weight, lbs (kg) .................... 6200 (2810)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |