Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 226D3 |
Caterpillar 226D3 Maintenance
The Cat 226D3 skid steer loader is powered by 134.1 cu.in (2.2L) Caterpillar C2.2T four-cylinder turbocharged diesel engine with a rated power of 65.8 hp (65.8 kW) at 3000 rpm. The Caterpillar 226D3 is equipped with a two-speed hydrostatic transmission, radial-lift loader boom, 80HS continuous roller chains, and 10x16.5 tires. The hydraulic system has a pump with fluid flow rate of 18 gpm (69 lpm) or 26 gpm (99 lpm). The hydraulic pressure is 3335 psi (230 bar). The skid steer loader has a rated operating capacity of 1550 lbs (705 kg) and tipping load of 3100 lbs (1410 kg). The lift height is 111" (2820 mm) to hinge pin, and dump height is 81.7" (2075 mm).
Refill Capacities |
Engine Oil Capacity, gal (L) .................... 2.6 (10.0)
Engine Coolant Capacity, gal (L) .................... 3.15 (12.0)
Hydraulic Tank Fluid Capacity, gal (L) .................... 9.0 (34.0)
Hydraulic System Fluid Capacity, gal (L) .................... 11.9 (45.0)
Chain Case Oil Capacity, gal (L) .................... 1.85 (7.0)
Recommended Oil and Fluid |
Engine Oil Type .................... Cat DEO-ULS, SAE 10W-30, 15W-40. API Service CE, CF-4, CG-4, CH-4
Engine Coolant Type .................... Caterpillar Diesel Engine Antifreeze/Coolant
Hydraulic Fluid Type .................... Cat HYDO Advanced, Cat DEO, SAE 15W-40, 5W-40
Chain Case Oil Type .................... Cat DEO-ULS, SAE 15W-40, 5W-40
Service Intervals |
Lubricate Cylinder Pivot Points .................... Every 100 Hours
Check and Adjust Alternator/Fan Belt .................... Every 250 Hours
Clean Cab Air Filters .................... Every 250 Hours
Clean Primary Engine Air Filter .................... Every 250 Hours
Check and Adjust Drive Chain .................... Every 250 Hours
Change Engine Oil .................... Every 500 Hours
Replace Engine Oil Filter .................... Every 500 Hours
Replace Primary Fuel Filter .................... Every 500 Hours
Replace Final Fuel Filter .................... Every 500 Hours
Replace Primary Engine Air Filter .................... Every 500 Hours
Replace Secondary Engine Air Filter .................... Every 500 Hours
Replace Hydraulic Tank Breather .................... Every 500 Hours
Replace Cab Air Filters .................... Every 500 Hours
Check Chain Case Oil Level .................... Every 500 Hours
Change Chain Case Oil .................... Every 1000 Hours
Change Hydraulic Fluid .................... Every 1000 Hours
Replace Hydraulic Oil Filter .................... Every 1000 Hours
Replace Alternator/Fan Belt .................... Every 1000 Hours
Service And Refill Cooling System .................... Every 3000 Hours
Replacement Parts |
Engine Oil Filter. Part Number .................... 220-1523
Engine Fuel Filter. Part Number .................... 541-6956
Primary Engine Air Filter. Part Number .................... 415-2592, 526-3118
Secondary Engine Air Filter. Part Number .................... 415-2593, 526-3122
Cab Air Filter. Part Number .................... 265-6619, 265-6618
Hydraulic Oil Filter. Part Number .................... 421-5479
Hydraulic Tank Breather. Part Number .................... 420-9748
Alternator/Fan Belt. Part Number .................... 513-8590
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |