Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 226B |
Caterpillar 226B Specifications
The Cat 226B skid steer loader driveline system components: a 134.1 cu.in (2.2L) Caterpillar 3024CT 4-cylinder direct injection turbocharged diesel engine with a rated power of 57 hp (43 kW), and 1-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 15.6 gal/min (60 l/min). The system pressure is 3335 psi (230 bar). The Cat 226B is equipped with wet multi disc brakes, 80HS roller chains, and 10x16.5 tires. The skid steer loader has a boom lifting force of 3340 lbs (1515 kg) and bucket breakout force of 4085 lbs (1852 kg). The rated operating capacity is 1500 lbs (680 kg), and tipping load is 3000 lbs (1360 kg).
Engine Specs |
Engine Model ...................... Cat 3024CT
Engine Type ...................... 4-cycle liquid cooled diesel
Number of Cylinders ...................... 4, in-line
Displacement, cu.in (L) ...................... 134.1 (2.19)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 57.0 (43.0)
Maximum Engine Power, hp (kW) ...................... 62.0 (46.0)
Rated Engine Speed, rpm ...................... 2600
Compression Ratio ...................... 23.3:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct Injection
Air Cleaner ...................... Dual element, radial seal
Valve Lash, in (mm) ...................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) ...................... 17.1 (65.0)
Oil Capacity, qts (L) ...................... 8.5 (8.0)
Coolant Capacity, qts (L) ...................... 10.6 (10.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 85
Drive Train |
Drive System Type ...................... Hydrostatic, four wheel chain drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80 HS continuous roller chain
Brakes Type ...................... Wet multi disc
Front Tire Size (Std) ...................... 10x16.5
Rear Tire Size (Std) ...................... 10x16.5
Front Tire Size (Opt) ...................... 31x6.00-10
Rear Tire Size (Opt) ...................... 31x6.00-10
Chaincase Capacity, qts (L) ...................... 6.4 (6.0)
Forward Speed, mph (kph) ...................... 7.9 (12.7)
Reverse Speed, mph (kph) ...................... 7.9 (12.7)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 15.8 (60.0)
Pump Flow (High), gpm (Lpm) ...................... 26.4 (100.0)
System Pressure, Bar (psi) ...................... 230 (3335)
Hydraulic Reservoir Capacity, gal (L) ...................... 9.2 (35.0)
Hydraulic System Capacity, gal (L) ...................... 14.5 (55.0)
Number of Valves ...................... 3
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1500 (680)
Tipping Load, lbs (kg) ...................... 3000 (1360)
Boom Lifting Force, lbs (kg) ...................... 3340 (1515)
Bucket Breakout Force, lbs (kg) ...................... 4085 (1852)
Dimensions and Weight |
Wheelbase, in (mm) ...................... 38.8 (985)
Height (Operator Cab), in (mm) ...................... 76.8 (1950)
Height (Boom Raised), in (mm) ...................... 146 (3710)
Length (w/o Bucket), in (mm) ...................... 99.2 (2520)
Length (Bucket On Ground), in (mm) ...................... 127.4 (3235)
Width (w/o Bucket), in (mm) ...................... 60 (1525)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 112.4 (2855)
Height to Hinge Pin (Carry Position), in (mm) ...................... 9.4 (240)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 85.4 (2170)
Dump Reach At Max Height, in (mm) ...................... 19.9 (505)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 60 (1525)
Ground Clearance, in (mm) ...................... 7.7 (195)
Turning Radius (w/Bucket), in (mm) ...................... 76.4 (1940)
Operating Weight (Std Flow), lbs (kg) ...................... 5835 (2645)
Operating Weight (High Flow), lbs (kg) ...................... 5905 (2677)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |